VERDANT PCRPT076 is an RPET (Post Consumer Recycle Polyethylene Terephthalate) with a blue tint.

VERDANT RRPT076E is a food grade RPET (Recycle Polyethylene Terephthalate) utilizing post consumer PET bottles and produced via a super-clean recycling process. The U.S. FDA has approved this process to produce recycled polyethylene terephthalate (PCR-PET) pellets that are suitable for use at levels of up to 100% in the manufacture of PET containers for contact with all food types, such as bottles for mineral water, juices, etc., and thermoformed sheets for meat and fruit trays and other food contact applications except for microwave and conventional oven cooking.

VERDANT PCRPT078 is a food grade (manufactured under FDA LNO #185) RPET (Post-Consumer Recycle Polyethylene Terephthalate) produced with a clear tint.

VERDANT PCRPT080 Series is an RPET (Recycle Polyethylene Terephthalate) produced from 100% post consumer PET beverage containers that are washed, ground into flakes, washed again, and decontaminated through a solid-state polycondensation and pelletizing process under conditions dictated by the Letter of Non-Objection (LNO) issued by the Federal Drug Administration (FDA) to the O.E.M. of the de-contamination equipment. The LNO states that providing pcrPET is produced in accordance with the terms and conditions of the LNO, the FDA does not object to such pcrPET being used to manufacture plastic food packaging for applications where the food is in direct contact with the pcrPET package. This product is available in clear and green tints. The clear tint version is VERDANT PCRPT080, and the green tint version is VERDANT PCRPT080T.

VERDANT PCRPT080NN is an RPET (Recycle Polyethylene Terephthalate) produced from recycled disposable PET bottles with nominal intrinsic viscosity of 0.80 dl/g. This resin is produced in a state-of-the-art continuous polymerization technology and is combined with a strict quality monitoring system in production facilities that are approved by ISO9001, ISO14001 and OHSAS 18001 systems to confirm quality. This product conforms to FDA Regulation 177.1630 and is recyclable.

VERDANT PCRPT082 is a food grade RPET (Recycle Polyethylene Terephthalate) utilizing post consumer PET bottles and produced via a super-clean recycling process. The U.S. FDA has approved this process to produce recycled polyethylene terephthalate (PCR-PET) pellets that are suitable for use at levels of up to 100% in the manufacture of PET containers for contact with all food types, such as bottles for mineral water, juices, carbonated soft drinks, etc., and thermoformed sheets for meat and fruit trays and other food contact applications except for microwave and conventional oven cooking.

VERDANT PCRPTF is an RPET (Recycle Polyethylene Terephthalate) in flake form produced from food and beverage containers as well as hygiene products. Its direct use is not recommended for the manufacture of food and beverage packing without prior decontamination. It is not recommended for entry to ultra-clean processes.

VERDANT PCRPTF072Z is a hot washed RPET (Recycle PolyethyleneTerephthalate) bottle flake with a clear tint.

VERDANT PCRPTF075 Series is an RPET (Recycle Polyethylene Terephthalate) in flake form produced with either a Clear tint (PCRPTF075Z), Green tint (PCRPTF075E) or Brown tint (PCRPTF075X).

VINPOL GP080 is a PET copolymer with low crystallinity and low acetaldehyde generation. It is designed for applications such as water bottles (including purified, mineral, distilled, drinking, flavored), food containers, cosmetics and pharmaceutical material packaging. It has high dimensional strength and mechanical properties and requires lower energy during processing. This product complies with U.S. FDA 21 CFR 177.1630.

VINPOL GP083 is a PET copolymer with excellent melting characteristics, a low crystallization rate and a broad processing window for stable injection and stretch blow molding. This product is suitable for 5 gallon bulk water containers or heavy gauge A-PET sheet. Its high brightness benefits cosmetic parts. This product complies with U.S. FDA 21 CFR 177.1630.

VINPOL GP084 is a PET copolymer with low crystallinity and low acetaldehyde generation. It is designed for carbonated soft drinks, alcoholic beverages and edible oil containers. It has high dimensional strength and mechanical properties, as well as lower energy requirements during bottle conversion. Pellet geometry and consistency of this product lowers fines generation and improves drying consistency at lower temperatures. This product complies with U.S. FDA 21 CFR 177.1630.

VINPOL GP084R is a PET copolymer with low acetaldehyde generation. It is designed for injection blow molding of PET bottles, containers, jars and extrusion of APET sheets/Films and PET straps. This product complies with U.S. FDA 21 CFR 177.1630.

VINPOL GP088 is a PET copolymer with low acetaldehyde generation. It is designed for applications such as 5 gallon blow molded containers.

VINPOL PBT BK is a recycle grade designed for compounders or color houses.

VINPOL PBT1650 is a PBT for compounding/fibers only. It is not intended for injection molding. It is FDA compliant. Its melt viscosity (@250°C/21.6 kgf) is 1,450-1,850 poise.

VINPOL PBT4000 is a PBT for compounding only. It is not intended for injection molding. Its melt viscosity (@250°C/21.6 kgf) is 3,500-4,500 poise.

VINPOL PT090 is a modified co-polyester with higher melt strength and chemical resistance designed to produce clear, high-gloss containers with improved dimensional, thermal and chemical stability and that can be recycled with clear PET. Containers made via injection reheat stretch blow molding are particularly suited to package more aggressive liquids such as air fresheners, hair dyes and alkaline chemicals, as well as for higher internal pressure and temperature applications such as aerosols. Containers made with this product can carry the “PETE 1” resin identification code and can be recycled with the clear PET stream. VINPOL PT090 complies with FDA and Cosmetic Act for all food packaging applications and certain processing conditions.

VINPOL PT092 is a high IV, non-fast reheat PET co-polyester with low acetaldehyde and superb clarity and gloss. It is suitable for producing high tenacity yarns, strapping bands, and thermoformed food packaging containers. VINPOL PT092 should comply with Commission Regulation (EU) No 10/2011 and with U.S. FDA 21 CFR 177.1630 f(1) and g(1) food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications.

VINPOL PT100 is a PET copolymer designed for fiber applications.

VINPOL PT101 is a co-polyester with high melt strength designed for extrusion blow molding of clear, high-gloss containers capable of being recycled with clear PET. This product is a semi-crystalline PET polymer with high melt strength and slow crystallization allowing for processing on typical extrusion PET blow molding equipment. It has a high melting point with a typical Tg. Containers made from VINPOL PT101 can carry the resin identification code “PETE 1”, and can be recycled with the clear PET stream. Containers made from this product are ideal for packaging juice, sports drinks, tea, edible oil, household cleaners, detergents, chemicals and automotive products and can replace containers made from PETG, PVC, PP, PC and HDPE. This product complies with FDA and Cosmetic act for all food packaging applications and certain processing conditions.

VINPOL PT125 is a co-polyester with intrinsic viscosity designed for extrusion blow molding of clear, high-gloss containers capable of being recycled with clear PET. Containers made from VINPOL PT125 can carry the resin identification code “PET 1”, and can be recycled with the clear PET stream. Containers made from this product are ideal for packaging juice, sports drinks, tea, edible oil, household cleaners, detergents, chemicals and automotive products and can replace containers made from PETG, PVC, PP, PC and HDPE. This product complies with FDA and Cosmetic act for all food packaging applications and certain processing conditions.

VINPOL PTFL is a polyethylene terephthalate in flake/shredded form.

VINPOL S-080 is a PET copolymer suitable for sheet and thermoforming applications.

VINPOL W076-FR is a PET copolymer with low crystallinity and low acetaldehyde generation, designed for the water container market. It has fast re-heat ability, saving energy during blow molding. Its low AA regeneration allows for better aroma and color retention of filled materials. This product complies with U.S. FDA 21 CFR 177.1630.