Polysulfone (PSU): PPSU
Produto | Disponibilidade | Descrição do produto |
---|---|---|
Ajedium™ Films -- Radel® R-5100 NT15 | América do Norte |
Radel® polyphenylsulfone is an amorphous thermoplastic material that offers exceptional hydrolytic stability, and toughness superior to other commercially available, high-temperature flims.
PPSU films have high deflection temperatures and outstanding resistance to environmental stress cracking. The polymer is inherently flame retardant. The excellent thermal stability makes films suitable for applications where very low shrink at high temperatures are needed. PPSU films also have good electrical properties.
Radel® film is off-white in color.
|
AuroraGuard™ ENV72-NC900 | África & Oriente Médio |
Extrusion, Injection Molding, Thermoforming Grade, Transparent-Slight Amber Tint, Excellent Impact Resistance, Exceptional Long Term Hydrolytic Stability and Resistance to Environmental Stress Cracking, Better Chemical Resistance Than PSU or PEI, Inherently Flame Retardant, Maximum Temperature of Use 375 °F, Withstands Repeated Steam Sterilizations,
NC900 = To Be Assigned 5 Digit Number Indicating Natural, Black, or Custom Color.
The ENV72 Series Products Are Available With Mold Release and/or UV Stabilizer.
Formerly known as ENVIROLEX™ ENV72-NC900
|
Ceramer 20 | América do Norte |
Ceramer and Ceramerplus are high performance polymers and additives based on polyphenylene sulfone (PPSO2).
Ceramer and Ceramerplus have excellent thermal stability, inherent flame resistance and universal chemical resistance.
|
ColorFast® PPSU-H200 | África & Oriente Médio |
PPSU-H200 is a standard flow injection molding grade of polyphenylsulfone (PPSU) with high heat resistance and toughness.
|
ColorFast® SFT5500 WT10082 | África & Oriente Médio |
Proprietary polysulfone compound for Aerospace applications. FAR 25.853(d) compliant; flame, smoke, toxicity, OSU 55/55. Custom white color.
|
ColorRx® PPSU-1000RX | África & Oriente Médio |
PPSU-1000RX is a high flow injection molding grade of polyphenylsulfone (PPSU) with high heat resistance and toughness. It is suitable for healthcare applications and sterilizable by EtO and steam.
|
ColorRx® PPSU-2000RX | África & Oriente Médio |
PPSU-2000RX is a high flow injection molding grade of polyphenylsulfone (PPSU) with excellent hydrolytic stability and toughness. It is suitable for healthcare applications and sterilizable by EtO and steam.
|
ColorRx® PPSU-H200 | África & Oriente Médio |
PPSU-H200 is a standard flow injection molding grade of polyphenylsulfone (PPSU) with high heat resistance and toughness. It is suitable for healthcare applications and sterilizable by EtO and steam.
|
DURASON PPSU1000SHF | América do Norte | |
DURASON PPSU2000H | América do Norte |
DURASON PPSU2000H is a middle viscosity PPSU. It offers excellent impact, chemical resistance, hydrolysis resistance, transparency, creep resistance, and is inherently flame retardant. It is available in AMR, EUR, and APAC. It is available in natural, black, and colors.
|
DURASON PSU 1700 | América do Norte |
DURASON PSU 1700 is a high strength polysulfone (PSU). It is resistant to hydrolysis, oxidation, and prolonged exposure to high temperature environments. It is available in natural, black, and colors. This grade is available in AMR, EUR, and APAC.
|
DURASON PSU2000 | América do Norte |
DURASON PSU2000 is a middle viscosity Polysulfone (PSU). It is suitable for injection molding or extrusion. This material offers a great balance of translucency, chemical resistance, temperature resistance, and steam resistance. It is available in natural, black, and colors. This grade is available in AMR, EUR, and APAC.
|
DynaMix™ 2944-G | América do Norte |
Glass Filled PPSU
Features:
- Excellent Chemical Resistance
- Low Density
- Good Dimensional Stability
- Excellent Processability
Applications:
- Gears and Bearings
- Small Appliances
- Industrial
|
Edgetek™ RA-10GF-10CF/000 HI | África & Oriente Médio | |
ESD C 1480 P | África & Oriente Médio |
ESD Protection - Electrically Conductive
|
Generic PPSU - Glass Fiber | África & Oriente Médio |
This data represents typical values that have been calculated from all products classified as: Generic PPSU - Glass Fiber
This information is provided for comparative purposes only.
|
Generic PPSU | África & Oriente Médio |
This data represents typical values that have been calculated from all products classified as: Generic PPSU
This information is provided for comparative purposes only.
|
HiFill® PPSU 3010 NAT | América do Norte | |
HiFill® PPSU 4000 BK | América do Norte | |
HiFill® PPSU 4000 NAT | América do Norte | |
HiFill® PPSU GF10 | América do Norte | |
HiFill® PPSU GF20 | América do Norte | |
HiFill® PPSU GF25 LE | América do Norte | |
HiFill® PPSU GF40 | América do Norte | |
HiFill® PPSU GY061 | América do Norte | |
HiFill® PPSU HF NAT | América do Norte | |
HiFill® PPSU R5500 BK | América do Norte |
PSUM94063
|
HiFill® PPSU TL10 | América do Norte | |
InLube® PPSUCF10TF5SI2 | África & Oriente Médio |
InLube PPSUCF10TF5SI2 is a 10% carbon fiber reinforced PPSU with 5% PTFE and silicone. InLube PPSUCF10TF5SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.
|
InLube® PPSUGF10TF5SI2 | África & Oriente Médio |
InLube PPSUGF10TF5SI2 is a 10% glass fiber reinforced PPSU with 5% PTFE and silicone. InLube PPSUGF10TF5SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.
|
InLube® PPSUGF10TF8SI2 | África & Oriente Médio |
InLube PPSUGF10TF8SI2 is a 10% glass fiber reinforced PPSU with 8% PTFE and silicone. InLube PPSUGF10TF8SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.
|
InLube® PPSUTF8SI2 | África & Oriente Médio |
InLube PPSUTF8SI2 is a regular flow PPSU with 8% PTFE and silicone. InLube PPSUTF8SI2 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.
|
InStruc® PPSUCF10 | África & Oriente Médio |
InStruc PPSUCF10 is a 10% carbon fiber reinforced PPSU..InStruc PPSUCF10 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.
|
InStruc® PPSUCF5 | África & Oriente Médio |
InStruc PPSUCF5 is a 5% carbon fiber reinforced PPSU..InStruc PPSUCF5 offers high operating temperatures, good chemical compatibility, excellent hydrolysis resistance, good dimensional stability, and favorable mechanical properties.
|
InStruc® PPSUGF10 | África & Oriente Médio |
10% GLASS FIBER REINFORCED POLYPHENYLSULFONE
|
InStruc® PPSUGF15 | África & Oriente Médio |
15% GLASS FIBER REINFORCED POLYPHENYLSULFONE
|
InStruc® PPSUGF20 | África & Oriente Médio |
20% GLASS FIBER REINFORCED POLYPHENYLSULFONE
|
InStruc® PPSUVHFGF20 | África & Oriente Médio |
20% GLASS FIBER REINFORCED, HIGH FLOW PPSU
|
Lapex R G/10 | África & Oriente Médio |
Polyphenylene Sulphone (PPSU) based compound. Glass fibres. Low smoke density and low toxicity index. Very high dimensional stability.
|
Lapex R G/20 | África & Oriente Médio |
Polyphenylene Sulphone (PPSU) based compound. Glass fibres. Low smoke density and low toxicity index. Very high dimensional stability.
|