Industrial Standards Compliance: - ASTM D 3350: cell classification PE435440A CONTINUUM DGDA-2488 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. It is specifically designed for use in all duct and cable in conduit (CIC) applications for both telecommunications and power cables. Typical uses include high performance conduit for fiber optic networks and 5G expansion. The natural resin combined with color concentrate can be readily processed by any current duct or conduit extrusion method in all sizes at commercial rates.

CONTINUUM™ DGDA-2490 BK GL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ISO Standard -- MRS 10 / 20°C, PE100 listed by Exova -- CRS 10 (20°C, 100 yr); CRS 8 (40°C, 90 yr); CRS 6.3 (60°C, 11 yr); CRS 11.2 (14°C, 50 yr)

CONTINUUM™ DGDA-2490 BK 双峰聚乙烯树脂是采用UNIPOL™ II 工艺技术来制备的。这种产品可应用于管道领域，这些管道应用领域既要求长期的流体静力强度，也要求优异的耐慢速裂纹增长和耐快速裂纹扩展性能。其适用的应用领域包括有天然气配送管道、工业用管道、采矿、下水道以及市政水管管线等。 业界标准的合规性： ASTM D 3350：元件分类 黑色 - PE445576C （MRS）（参见注释1） 黑色 - PE445574C （HDB） （参见注释1） 塑料管件研究所 （PPI）：TR-4 黑色管件 - CONTINUUM™ DGDA-2490 BK （参见注释1） ISO PE100 管件牌号 - CRS 10 @ 20°C；MRS 10 @ 20°C，100 年；CRS 8 @ 40°C，90 年；CRS 6.3 @ 60°C，11 年；CRS 11.2 @ 14°C，50 年 ASTM PE4710 管件牌号 - 1600psi HDB 和 1000psi HDS @ 73°F，以及 1000psi HDB @ 140°F NSF 国际：标准14和61 黑色管件 - DGDA-2490 黑色 100 （参见注释1） 请查询法规以获取完整的详细资料。 注释： （1） 原色树脂是在适当的条件下与陶氏所准用的炭黑母料DFNF-0092 （6.5%）采用挤出工艺得到的。

CONTINUUM™ DGDA-2490 BL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural - PE445574A CC2 -- Blue - PE445574E CC3 (See Notes A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe - CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- Blue Pipe - CONTINUUM™ DGDA 2490 BL (See Notes B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on blue resin (natural resin plus 2% DFDB-0027 BL2). (B) Natural resin extruded under proper conditions with 2.0% blue masterbatch DFDB-0027 BL2

CONTINUUM DGDA-2490 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A CC2 (MRS) - Black - PE445576C CC2 (MRS) (See NOTES A) - Natural - PE445574A CC2 (HDB) - Black - PE445574C CC2 (HDB) (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM DGDA-2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F - Black Pipe - CONTINUUM DGDA-2490 BK (See NOTES A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr; CRS 11.2 @ 14°C, 50 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Natural Pipe - DGDA-2490 NT - Black Pipe - DGDA-2490 BK (See NOTES A) U.S. FDA 21 CFR 177.1520(c)3.2a Consult the regulations for complete details NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

CONTINUUM™ DGDA-2490 WH Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural — PE445574A CC2 -- White - PE445574E CC0 (See Note A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe — CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- White Pipe — CONTINUUM™ DGDA 2490 WH (See Note B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on white resin (natural resin plus 2% DFDA-0027 WH 2). (B) Natural resin extruded under proper conditions with 2.0% white masterbatch DFDA-0027 WH2

CONTINUUM™ DGDA-2492 BK 双峰聚乙烯树脂是采用UNIPOL™ II 工艺技术来制备的。这种产品可应用于管道领域，这些管道应用领域既要求长期的流体静力强度，也要求优异的耐慢速裂纹增长、耐快速裂纹扩展性能以及熔体强度高。其适用的应用领域包括有天然气配送管道、大口径工业用管道、采矿、下水道以及市政水管管线等。 业界标准的合规性： ASTM D 3350：元件分类 黑色 - PE445576C （MRS） （参见注释1） 黑色 - PE445574C （HDB） （参见注释1） 塑料管件研究所 （PPI）：TR-4 黑色管件 - CONTINUUM™ DGDA-2492 BK （参见注释1） ISO PE100 管件牌号 - MRS 10 @ 20°C；CRS 6.3 @ 60°C，11 年 ASTM PE4710 管件牌号 - 1600psi HDB 和 1000psi HDS @ 73°F，1000psi HDB @ 140°F NSF 国际：标准14和61 黑色管件 - DGDA-2492 BK³ ASME -Code Case N755 请查询法规以获取完整的详细资料。 注释： （1） 压制部件在制备的时候是根据ASTM D 4703 中的程序C 的要求，除非在测试方式中另有指定。性能将随着模制条件以及老化时间的变化而发生变化。

CONTINUUM™ DGDA-2492 NT N Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include water pipes at nuclear power facilities, natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C CC2 (See NOTES) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492N BK -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black PE4710 Pipe - CONTINUUM DGDA-2492 Consult the regulations for complete details. NOTES: Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A CC0(MRS) - Black - PE445576C CC2 (MRS) (See NOTES A) - Natural - PE445574A CC0(HDB) - Black - PE445574C CC2 (HDB) (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492 BK (See NOTES A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 6.3 @ 60°C, 11 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDA-2492 Black (See NOTES B) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2502 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDA-2502 BK has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC0 - Black - PE445574C CC2 (see Notes A & B) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM™ DGDA-2502 NT -- ASTM PE4710 pipe grade - 1600psi HDB,1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - Black Pipe - CONTINUUM DGDA-2502 BK (see Notes 1 & 2) -- ISO PE100 Pipe grade - MRS 10 @ 20° C -- ASTM PE4710 pipe grade - 1600psi HDB, 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International : Standard 14 & 61 - Natural Pipe - DGDA-2502 NT - Black Pipe - DGDA-2502 BK (see Notes A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

Industrial Standards Compliance: - ASTM D 3350: cell classification - Black - PE445576C - Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES A) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; MRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB @ 73°F and 1000psi HDB @ 140°F - National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES A) - Standard 14 and 61. - Consult the regulations for complete details. CONTINUUM™ DGDB-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A - Black - PE445576C (See NOTES A & B) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES B) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB and 1000 psi HDS @ 73°F and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES B) Consult the regulations for complete details. CONTINUUM™ DGDB-2490 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Black - PE445574C CC2 (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM™ DGDC-2480 NT - Black Pipe - CONTINUUM DGDC-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2480 NT - Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).

CONTINUUM™ DGDC-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600 psi HDB and 1000 psi HDS @ 73°F -- 1000 psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - CSA B137.1 PE4710 PLUS and B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural Resin - PE445574A CC3 - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDC-2492 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600psi HDB and 1000psi HDS @ 73°F -- 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM™ DGDC-2492 Black (See NOTES B) Canadian Standards Association (CSA) - Black Pipe - B137.1 PE4710 PLUS - Black Pipe - B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2502 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, chlorinated water and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDC-2502 NT has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC3 - Black - PE445574C CC3 (see Notes A and B) - Plastics Pipe Institute (PPI): TR-4Natural Pipe - CONTINUUM DGDC-2502 NT ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - Black Pipe - CONTINUUM DGDC-2502 BK (see Note A & B)ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - ISO PE100 pipe grade - MRS 10 @ 20° C - NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2502 NT - Black Pipe - DGDC-2502 BK (see Note A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK). (B) Natural resin extruded under proper conditions with 6.5% carbon black masterbatch DFNF-0092 BK.

CONTINUUM™ DGDD-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance ASTM D 3350: cell classification - Black - PE445574 CC0 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) - ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDD-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance - ASTM D 3350: cell classification -- Natural - PE445574A -- Black - PE445574C (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in compression and injection molded beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. CONTINUUM™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. CONTINUUM™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end results are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. Main Characteristics: - Excellent Stiffness, ESCR, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature - Controlled Sensory Properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - U.S. USP CLASS VI Consult the regulations for complete details.

CONTINUUM™ DMDC-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. Its unique properties also make it suitable for living hinge closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA-DMF - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDC-1270 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Additive Complies with - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection - USP Class VI Consult the regulations for complete details. Additive Antiblock:No Slip: No Processing Aid: Yes

CONTINUUM™ DMDD-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection Consult the regulations for complete details.

CONTINUUM™ DMDE-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Agent Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a. Consult the regulations for complete details.

DMDE-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDE-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDF-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

DFDA-1224 NT is a natural high molecular weight, low density polyethylene. DFDA-1224 NT has been designed for use as a crosslinkable homopolymer for use with organic peroxides. The molecular characteristics of the product provide excellent extrusion processing, high efficiency of crosslinking, and excellent mechanical properties.

DFDA-1375 RD 是一种线性低密度聚乙烯电缆护套材料，以粒料形式供货。该产品专门应用于可识别电力电缆加工，在厚度为10 mils (0.25 mm)时，其不透明性要高于DFDA-1374 RD。该产品中带有一个有机颜料和填料体系，使其在酸、碱和水中均具有优异的保色性。该产品与LLDPE 护套相容，建议将其作为一种带材与DFDG-6059 BK一同使用。 规格 DFDA-1375 RD 满足以下原材料规格要求： - ASTM D 1248 Type 1, Class B, Category 4, Grades J1 和 J3

Dow™ Electrical & Telecommunications DFDA-3642 NT is a hexene-copolymer LLDPE designed for Low Voltage cable applications. It is intended for use in a one-step (monosil®) or two-step (Sioplas®) process in unfilled or filled (such as HFFR) systems. It provides an excellent balance of processability, mechanical properties and electrical properties. An appropriate amount of metal deactivator and antioxidant should be added to meet the aging requirements. The material does not contain slip or anti-block additives. Specifications DFDA-3642 NT meets the following material specifications: - ISO 17855-PE-LLD,, J-AGN, 18-D045 - ASTM D 1248: Type I, Class A, Category 3

DFDA-4850 NT is a low density, thermoplastic, unfilled polyethylene compound designed for starting-up and shutting-down medium and high voltage (5 kV and higher) power cable insulation extruders. It has a high degree of cleanliness required for these applications. DFDA-4850 NT is a nominal 2.0 melt index, 0.92 density, high pressure LDPE resin that has been stabilized with an antioxidant system that is compatible with HFDB-4201 EC, HFDB-4201 SC and HFDB-4202 EC. Cleanliness Requirements DFDA-4850 NT is required to meet strict standards for cleanliness as established by The Dow Chemical Company for an unfilled, thermoplastic insulation purge-type compound. The product is tested to ensure a high level of cleanliness. Pellet samples are visually inspected and extruded tapes are scanned by an automatic inspection system in a class 10,000 clean room. The purity data is managed using an acceptance sampling plan which ensures that the product in the shipping container meets or exceeds the required cleanliness standards.

绝缘树脂 Dow AXELERON™ GP A-7530 NT 以粒料形式供货，是一种采用陶氏的UNIPOL PE工艺制备的线性低密度聚乙烯(LLDPE) 树脂，它具有优异的电性能，可用于实心电缆的绝缘材料。 规格 Dow AXELERON™ GP A-7530 NT 满足以下规格要求： - ASTM D-1248 Type I Category 4, Grade E4 与 E5。

DOW™ Electrical & Telecommunications DFDK-6010 BK 是一种炭黑填充的母料，含有防老化稳定剂，专为与陶氏聚乙烯树脂配套使用用于黑色电信、电力和光纤电缆的制造。为了在护套成品中达成2.6%的炭黑水平，DOW™ Electrical & Telecommunications DFDK-6010 BK的加入量应该在6.2%。 在以上建议的炭黑含量水平时，DOW™ Electrical & Telecommunications DFDK-6010 BK 可为电信、电力和光纤电缆带来优异的紫外线防护功能，满足这些电缆对材料分散的要求。 加工工艺： 应该按照正确的配比，将DFDK-6010 BK 炭黑母料和所选用的陶氏聚乙烯树脂均匀地加入挤出机料斗，以确保制得的成品的各个部分均含有2.6%的炭黑含量。根据所选用的基础树脂来决定适宜的熔融挤出温度。

用于电线和电缆的乙烯共聚物 Dow AXELERON™ GP K-6050 NT 是一种增强型的线性低密度聚乙烯树脂，在适当着色和经过稳定化之后可作为电缆护套材料。这种材料具有更高的韧性、强度，耐热性能高，同时还具有良好的柔软性、优异的耐环境应力开裂性能和优异的加工性能。由于其在机械性能和加工特性之间具有良好的平衡性，使得Dow AXELERON™ GP K-6050 NT 成为电力电缆和电信电缆的非常好的护套材料。 加工建议： Dow AXELERON™ GP K-6050 NT 可使用很多的普通的商用护套挤出机进行挤出加工。一般来说，挤出机料筒温度取决于很多因素，比如挤出机的规格。 一个较好的出发点是：在熔融温度低于250°时，料筒温度设置：140/190/200/200/200/200°C 。 应用领域： Dow AXELERON™ GP K-6050 NT 是一种原色树脂，可与炭黑或者颜料共混并需加入一种合适的紫外线稳定剂以确保其具有足够的耐候性能。需要加入适量的抗氧剂以确保其长期的耐老化性能。 规格： - 在采用业界标准的商用挤出规范时，这种聚合物材料符合以下电线和电缆材料的规格要求： ASTM D 1248, Type I, Class A, Category 3 Grade J3, E4. ISO 1872-PE, KGN - 在于适宜的炭黑和色母料混配，采用业界标准的商用挤出规范时，采用了Dow AXELERON™ GP K-6050 NT 制得的护套可满足以下规格要求： EN 50290-2-24 IEC 60708 IEC 60502 ST3 IEC 60840 ST3 HD 620 S1 Part 1, DMP 12, 14, 17 BT M132 请查询法规以获取完备的细节资料。

DOW™ Wire & Cable DFNK-0012 NT is a masterbatch for use as a nucleating agent in gas injection applications. It is specially designed for easy incorporation into HDPE and LDPE. When used correctly, it allows the formation of small, uniformly distributed cells. The masterbatch is a 2% concentrate of an exothermic chemical blowing agent in a high pressure LDPE base resin. It should be used at 0.5-3% masterbatch concentration. DFNK-0012 NT contains a stabilizer protecting against thermal oxidation and catalytic degradation by copper. Applications: Typical applications include RF cable and CATV drop cable with expansion rates of up to 80 %.

DGDA-1310 BK is a black HDPE jacket grade for power and telecom cable applications. The material provides excellent mechanical and physical properties such as environmental stress crack resistance and termite resistance in combination with good processability. DGDA-1310 BK can be extruded using conventional cable jacket techniques with melt temperatures typically between 200 and 230 °C. Specifications. DGDA-1310 BK meets the following Raw material specifications: - ASTM D 1248 Type III, Class C, Category 5, Grade J4, E8, E9, W8, W9 - ISO 1872-PE, KHL, 50-D003 Cables jacketed with DGDA-1310 BK, using industry standard commercial extrusion practice, should meet the following cable specifications: - IEC 60502, ST 7 - IEC 62067, ST 7 - IEC 60840, ST 7 - ICEA S-94 649 - ICEA S-108 720 - ICEA S-97 682 - ICEA-S-87-640 - BS 6234: Type H03C, TS2 - Telcordia GR-70-CORE - HD 620 S2, Part 1, Table 4B, type DMP2, DMP 9-10, DMP 14-15, DMP 17 - EN 50290-2-24

Dow Electrical and Telecommunications DGDA-1310 NT High Density Polyethylene Resin is a high performance resin with an outstanding balance of processability and toughness. Dow Electrical and Telecommunications DGDA-1310 NT is designed for use in wire and cable extrusion for Monosil process and both power and telecommunication jacketing. DGDA-1310 NT also has excellent electrical properties and superior environmental stress crack resistance. Specifications Dow Electrical and Telecommunications DGDA-1310 NT meets the following specification: - ASTM D-1248 Type III, Class A, Category 5, Grade E9

应用于自着色的 Dow AXELERON™ GP K-6862 NT 聚乙烯树脂是一种高密度聚乙烯树脂，在适当着色、经过稳定化处理之后可作为电缆的护套材料。这种材料具有高硬度、韧性高、拉伸强度高，耐热性能更高，此外，它还具有良好的柔软性、优异的耐环境应力开裂性能和良好的加工性能。 由于其独特的HDPE 和 MDPE的性能组合使得 Dow AXELERON™ GP K-6862 NT 特别适宜于作为电力电缆和电信电缆的护套材料。 加工建议： Dow AXELERON™ GP K-6862 NT 的挤出加工可使用很多普通的带夹套挤出机。典型的挤出机料桶温度取决于很多因素，比如挤出机规格和机头尺寸等。一个较好的出发点是： 在熔融温度低于250°C时，挤出机料桶温度设置为140/190/200/200/200/210/210°C。 应用领域： Dow AXELERON™ GP K-6862 NT 是一种原色树脂，可与炭黑或者色母料共混并需加入一种合适的紫外线稳定剂以确保其具有足够的耐候性能。需要加入适量的抗氧剂以确保其长期的耐老化性能。 这些护套可用于电力电缆和电信电缆，包括光纤电缆。 储存： 储存环境和储存条件会极大地影响物料的储存时间。在极端条件下的储存有可能影响产品的质量、加工或者性能表现。应该按照良好制造规范来进行储存，比如储存环境干燥，储存温度在10 到 30°C之间。