AvaSpire® PAEK film is a unique thermoplastic film that is characterized by a distinct combination of properties, which include strength, ductility, fatigue resistance, high purity and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in aerospace, electronics, transportation, chemical processing, and other industrial uses.

KetaSpire® KT-820 PEEK film is thermoplastic film that is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, high purity, and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in aerospace, electronics, chemical processing, healthcare, transportation, and other industrial uses.

AvaSpire® AV-481 is an unreinforced PAEK (polyaryletherketone) that offers improved ductility and impact strength relative to PEEK while offering similar or superior melt processability to high melt flow PEEK that is available on the market. Chemical resistance and environmental stress cracking resistance of AV-481 are also on par with that of unreinforced PEEK. This product has been specifically formulated for applications requiring an excellent balance of chemical resistance and mechanical toughness along with very high melt flow characteristics to allow filling of very thin and long flow length parts like cable ties. The heat resistance of this grade is also quite high with a heat distortion temperature in excess of 200°C and very good long term oxidative stability at elevated temperatures. This combination of properties makes AV-481 well-suited for applications in automotive, aerospace, electrical/electronics, and other industrial uses. AvaSpire® AV-481 is an injection molding grade and can be easily processed by typical injection molding methods using standard equipment. The material is available in beige (AV-481 BG15). Because the material is naturally lighter in color than typical PEEK resin, AV-481 provides greater versatility in its ability to be colored. - Beige: AV-481 BG 15

AvaSpire AV-621 CF30是AvaSpire AV-621的30% 碳纤增强牌号。尺寸稳定性和抗翘曲性能优于30% 碳纤增强PEEK。韧性和抗冲击强度高于PEEK（聚醚醚酮） ，在 所有AV 621 牌号中，AV-621 CF30具有最高的强度、刚度和抗疲劳性。而且，该树脂同时保留了碳纤增强PEEK所具有的大多数有用的关键性能，包括耐化学性、抗疲劳性、以及长期热氧化稳定性。AV-621 CF30各种性能的出色平衡使之可以用于各行各业广泛的用途，包括医疗保健、交通运输、电子和化学处理。 该材料可以在标准设备上很方便地进行熔融加工。AV-621 CF30的熔融加工性能非常接近30% CF 增强PEEK。低流动性AV-621 CF30牌号非常适合挤出用途，同时具有AV-651 CF30所具有的性能.

AvaSpire AV-621 GF30是AvaSpire AV-621的 30%玻纤增强牌号。该配方比30% 玻纤增强PEEK具有更好的尺寸稳定性和更低的翘曲。该树脂保持了玻纤增强PEEK大多数有用的超高性能，包括耐化学性、耐疲劳性，长期热氧化稳定性，但热变形温度低于30%碳纤增强PEEK。 该材料在各种性能之间取得的优异平衡使之非常适合包括医疗保健、交通运输、电子、石油和天然气、化学处理等要求苛刻的各类行业。 -米色： AV-621 GF30 BG 20 -黑色：AV-621 GF30 BK95

AvaSpire AV-621是未增强聚芳醚酮（PAEK） ，韧性和冲击强度高于PEEK（聚醚醚酮） ，同时保留了PEEK所具有的大多数有用的关键性能。AV-621为低流动性牌号，类似于专门针对注塑成型和薄膜挤出的中等流动牌号AvaSpire AV-651。AvaSpire AV-621适于多种加工方式，包括模压成型、原型挤塑、以及注塑成型。 AV-621 专门开发用于追求耐化学性和机械强度平衡、赋予部件优美外观，并缩小超高分子间的性能差距的产品。所有这些特性使材料非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。 AvaSpire AV -621在标准设备上用常规热塑性塑料熔融加工的方式加工，树脂呈均匀的不透明状，颜色类似PEEK的米色。 - AvaSpire AV-621 NT

AvaSpire® AV-622 is an unreinforced polyaryletherketone (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-622 grade is the low melt flow (higher molecular weight) resin that is suited for a variety of processing methods including compression molding, stock shape extrusion, as well as injection molding. AV-622 has been formulated for applications requiring a balance of chemical resistance and mechanical strength along with good part aesthetics and high purity, thereby bridging the performance gaps within the ultra polymers space. These and other properties make this resin well-suited for applications in semiconductor, electronics, and other industries. AvaSpire® AV-622 is easily fabricated using conventional thermoplastic melt processing techniques and standard equipment. The resin has a uniform opaque appearance with a beige color similar to that of PEEK. - AvaSpire® AV-622 NT

AvaSpire AV -630是未增强聚芳醚酮（PAEK），用来替代低流动性PEEK（聚醚醚酮），用于超薄膜的挤出。厚度低至0.2密耳（5微米）的薄膜可以通过常规热塑性塑料薄膜挤出设备用AV -630 成功地熔融挤出。 AV-630薄膜与相应的PEEK薄膜相比具有一定的性能优势，包括更好的韧度和延展性、温度高于150 ℃时依然保持较高的机械完整性、能更好地适应粘合剂、更耐火焰传播。超薄膜（厚度 <15微米）也表现出更好的韧度，在相同厚度条件下，手感比PEEK薄膜光滑。 用AV -630生产的亚密耳厚度薄膜可广泛用于各种工业领域。常规应用包括电容器、电绝缘性、柔性电路基板、特种层压板、复合材料薄膜层、防潮阻隔、衬里和航空航天薄膜，如隔热隔音毯套袋材料。 - 本色： AvaSpire AV-630 NT

AvaSpire AV- 651 CF30 是AvaSpire AV-651的 30％的碳纤维增强牌号。该配方与30%碳纤增强PEEK相比，具有尺寸稳定性更好、注塑成型时更抗翘曲等优点。 在所有AV-651系列材料中，AV -651 CF30牌号具有最高的强度、刚度和耐疲劳性。此外，这种树脂通常保留了碳纤维增强PEEK的大多数有用的超高性能优势，包括耐化学性、耐疲劳性，长期热氧化稳定性。 AV- 651 CF30出色的平衡性能使之非常适合包括医疗保健、交通运输、电子、石油和天然气等行业在内的广泛的应用。这种树脂可以很容易地在标准设备上通过注射成型进行熔融加工。AV-651 CF30的熔融处理性能整体上非常接近30% 碳纤增强PEEK。在具有AV-651 CF30相同的性能特征，同时可挤出加工的情况下，低熔体流动性 AV-621 CF30 牌号被认为更适合挤塑产品。

AvaSpire AV- 651 GF30是 30％玻纤增强聚芳醚酮（PAEK），专门配制用于机械强度和刚度需要高于未填充AV -651树脂的产品。在大多数化学品中，该树脂与玻纤增强PEEK（聚醚醚酮）的耐化学性能极为相似，热变形温度更低。 这些特性使材料非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。 -米色：AvaSpire AV-651 GF30 BG 20 - 黑色： AvaSpire AV-651 GF30 BK 95

AvaSpire® AV-651 GF50 is a 50% chopped glass fiber-reinforced polyaryletherketone (PAEK) resin. It has been specifically formulated to provide exceptionally high strength and stiffness at elevated temperatures along with very strong chemical resistance to a broad range of harsh chemical environments encountered across a wide variety of industries and engineering applications. Typical potential applications for AV-651 GF50 include orthopedic and dental instruments, under-the-hood automotive parts, and parts in the chemical and oil and gas industries. This grade is easily injection moldable into precision molded parts. Typical property data provided are based on a limited production history. - Beige: AvaSpire® AV-651 GF50 BG 20 - Black: AvaSpire® AV-651 GF50 BK 95

AvaSpire AV -651是未增强聚芳醚酮（PAEK） 。韧性和抗冲击强度高于PEEK（聚醚醚酮） ，耐化学性能和抗环境应力开裂性能高于AvaSpire AV -650。专门开发用于追求耐化学性和机械强度平衡、赋予部件优美的外观，并消除超高分子性能差距的产品。 这些特性使材料非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。 AvaSpire AV -651在标准设备上用常规注射成型和挤出的方法即可很方便地进行加工。 - 本色： AvaSpire AV-651 NT - 米色： AvaSpire AV-651 BG 15 - Black: AvaSpire® AV-651 BK 95

AvaSpire AV-722 CF30是AvaSpire AV-722的30%碳纤增强牌号。与30% 碳纤增强PEEK相比，部件具有更具经济性，同时保持了碳纤增强PEEK所具有的高性能优势。这些有用性能包括耐化学性、抗疲劳性以及长期热氧化稳定性。 AV-722 CF30 各性能的出色平衡使之可以用于各行各业广泛的用途，包括医疗保健、交通运输、电子和化学处理。 AV-722 CF30的熔融加工性能非常接近30% CF增强PEEK。

AV-722 SL30是 AvaSpire 聚芳醚酮（PAEK）耐磨损牌号，旨在为非润滑和润滑环境中的产品提供更低的磨损率。除了优异的耐磨损性外，该树脂也具有PEEK公认的超高性能，包括即使在高温下也具有出色的耐化学性、机械强度和刚度、以及长期耐高温热氧化稳定性。 AV -722 SL30树脂被配制为包括碳纤、石墨、聚四氟乙烯（PTFE）在内的耐摩擦/耐磨损三元添加剂系统。由于改性体系的存在，耐磨损性能优于 PEEK牌号，同时更具成本效益。 该树脂是一种低流动性（高粘度）牌号，设计用于注射成型不太复杂的形状或部件。凭借其在低剪切速率下的高粘度特性，该树脂具有高熔体强度，因此可挤塑加工成各种棒材、管道、管材和型材等原型产品。该树脂可以使用常规设备和技术进行熔融加工。

AvaSpire® AV-722 is an unreinforced polyaryletherketone (PAEK) that offers improved economics relative to PEEK while retaining most of PEEK's key performance attributes. AV-722 resin has been formulated for applications requiring high chemical resistance and mechanical strength along with low moisture absorption and good barrier properties. These and other properties make this resin well-suited for applications in healthcare, transportation, electronics, chemical processing and other industries. - Beige: AvaSpire® AV-722 BG 20

AV-742 SL30是 AvaSpire 聚芳醚酮（PAEK）耐磨损牌号，旨在为非润滑和润滑环境中的产品提供更低的磨损率。除了优异的耐磨损性外，该树脂也具有PEEK公认的超高性能，包括即使在高温下也具有出色的耐化学性、机械强度和刚度、以及长期耐高温热氧化稳定性。 AV -742 SL30树脂被配制为包括碳纤、石墨、聚四氟乙烯（PTFE）在内的耐摩擦/耐磨损三元添加剂系统。由于改性体系的存在，耐磨损性能优于 PEEK牌号，同时更具成本效益。 该树脂是一种低流动性（高粘度）牌号，设计用于注射成型难度具有挑战的薄壁、复杂的、难以成型的形状或部件。如果部件的几何形状导致加工中不必采用低粘度牌号，建议采用AV- 722 SL30作为首要考虑，以利用该牌号较高分子量的优势，从而获得更好的耐磨损性，以及与韧性相关的更好的整体机械性能。该树脂可以使用常规设备和技术进行熔融加工。 AV- 742 SL30的潜在用途包括轴套、轴承、防磨条、耐磨环、轧辊和滑动摩擦组件中的其它部件。在自然状态下，该树呈黑色。

AvaSpire AV -750 GF40是40％玻纤增强聚芳醚酮（PAEK），旨在满足市场对价格较低的PEEK （聚醚醚酮）的需求。该树脂具有PEEK（聚醚醚酮）的典型耐化学特征，同时保持了出色的耐高温性能。 其价格和性能有助于为PEEK树脂扩大市场机会，尤其是用于腐蚀控制的金属替代品领域的机会。 - 本色： AvaSpire AV-750 GF40 NT

AV-755 SL45 is a wear resistant grade of AvaSpire® polyaryletherketone (PAEK) designed to provide low wear rates and high pressure-velocity (PV) tolerance in lubricated wear environments. Like the other members of the AvaSpire® AV-700 series, AV-755 SL45 offers more attractive economics than PEEK while retaining most of PEEK's key attributes. In addition to the outstanding wear resistance, the resin also offers the outstanding combination of chemical resistance, mechanical strength and stiffness at elevated temperatures, as well as long-term and high temperature thermal-oxidative stability. AV-755 SL45 is formulated with a binary anti-friction/anti-wear additive system comprised of carbon fiber and graphite. By virtue of its additive system, this resin also offers, exceptionally high stiffness and very low moisture absorption. Potential applications for AV-755 SL45 include bushings, bearings, wear strips, wear rings, rollers, and other parts used in sliding friction components. This high flow (low viscosity) resin is black.

AvaSpire® AV-848 CF30 is a 30% carbon fiber-reinforced, high-temperature, polyaryletherketone (PAEK) that has been specifically formulated to provide several performance advantages over comparable grades of PEEK. These include improved dimensional stability, higher stiffness and lower CLTE from 150°C to 240°C, and lower modulus for greater flexibility at room temperature. High temperature AV-848 CF30 provides design engineers with an alternative to reinforced PEEK, specifically in demanding applications that require superior toughness, higher structural integrity, and exceptional chemical resistance. AvaSpire® AV-848 CF30 can be easily processed using standard thermoplastic melt processing techniques, including injection molding and extrusion.

AvaSpire® AV-848 GF30 is a 30% glass fiber-reinforced, high-temperature, polyaryletherketone (PAEK) that has been specifically formulated to provide several performance advantages over comparable grades of reinforced PEEK. These include improved dimensional stability, higher stiffness and lower CLTE from 150°C to 240°C, and lower modulus for greater flexibility at room temperature. High temperature AV-848 GF30 provides design engineers with an alternative to reinforced PEEK, specifically in demanding applications that require superior toughness, higher structural integrity, and exceptional chemical resistance. AvaSpire® PAEK can be easily processed using standard thermoplastic melt processing techniques, including injection molding and extrusion. - Natural: AvaSpire® AV-848 GF30 NT

AvaSpire® AV-848 is a high-temperature, polyaryletherketone (PAEK) that offers several key performance advantages over comparable grades of PEEK above 150°C, including better dimensional stability, lower CLTE from 150°C to 240°C, and lower modulus for greater flexibility at room temperature. - Natural: AvaSpire® AV-848 NT

Ketaspire® CF10 HC AM Filament incorporates 10% carbon fiber reinforcement into a PEEK matrix for increased strength offered for use in high-performance healthcare applications. This material provides long-term performance up to 240 °C, including exceptional chemical resistance. These properties make it particularly suited for metal replacement.

Ketaspire® CF10 LS1 AM Filament incorporates 10% carbon fiber reinforcement into a PEEK matrix for increased strength. This material provides long-term performance up to 240 °C, including exceptional chemical resistance. These properties make it particularly suited for metal replacement in critical applications in severe end-use environments, such as Oil & Gas, Aerospace and Automotive.

KetaSpire® KT-1211FP is a low melt flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural color fine powder form for compression molding and compounding uses in the health care industry. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. KetaSpire® PEEK also complies with the ISO 10993 standard for use in medical applications. KetaSpire® KT-1211FP is well-suited as a raw material or material of construction for a variety of healthcare applications.

KetaSpire® KT-810 is an ultra-high molecular weight natural PEEK resin having a melt viscosity ranging from 0.51-0.65 kPa-s as compared to 0.38-0.50 kPa-s for standard high-viscosity PEEK grades such as KT-820. KetaSpire PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to organics, acids and bases; exceptional retention of mechanical properties up to 240°C (464°F); best-in-class fatigue resistance; excellent wear resistance; ease of melt processing; and high purity. The KT-810 grade achieves a greater level of mechanical toughness than previously possible with PEEK, yet it is still processable by conventional methods including extrusion, injection molding, and compression molding. KetaSpire® KT-810 is particularly suited for compression molding applications such as machined parts and stock shapes wherein the inherent slow cooling rates of the process limit PEEK's toughness and often result in brittleness due to the higher crystallinity levels. The grade is available in two forms: fine powder with average particle size of approximately 50 micrometers (µm) for compression molding, and pellet form for extrusion and injection molding. The fine powder grade is designated KT-810FP while the pelletized product is available as KT-810 NT. - Fine Powder: KT-810 FP - Natural Pellet: KT-810 NT

KetaSpire KT -820是低流动级未增强聚醚醚酮（PEEK），呈润滑颗粒状。KetaSpire PEEK按照行业最高标准加工，以兼具不同的性能为特征，包括优异的耐磨损性、一流的抗疲劳性、易于熔融加工、高纯度、优异的耐有机物、酸和碱等化学物质的性能。 这些特性使得它非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。KetaSpireKT -820可以很容易地使用常规注塑成型和挤出工艺进行加工。有本色粗粉末牌号KetaSpire KT- 820P供配混。 粒状KT- 820微量喷洒了润滑剂硬脂酸钙（ 0.01 ％ ），方便颗粒在塑化螺杆中的输送。有类似于非润滑本色低流量牌号KetaSpire KT -820 NL可供 。 - 黑色：KT-820 BK 95

KetaSpire KT -820 CF30是低流量、30 ％碳纤增强聚醚醚酮（PEEK） 。在温度接近300℃时，碳纤增强 KetaSpire PEEK 的机械性能达到行业最高水平，并且，具有KetaSpire 产品系列最低的线性热膨胀系数。KetaSpire PEEK按照行业最高标准加工，以兼具各种出色的性能为特征，包括优异的耐磨损性、一流的抗疲劳性、易于熔融加工、高纯度、优异的耐有机物、酸和碱等化学物质的性能。 这些特性使得它非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。

KetaSpire KT-820是一种低流动性、 13％玻纤增强聚醚醚酮（ PEEK） 。优化了玻纤含量，以便在强度、刚度和与韧性相关的性能如抗冲击性和断裂伸长率之间取得平衡。与30%玻纤增强配方相比，低玻纤含量使树脂改进了外观、减少了各向异性。 KetaSpire PEEK按照行业最高标准生产，以兼具一流抗疲劳性、易于熔融加工、高纯度、优异的耐受有机、酸、碱等化学物质等突出性能为特征。 这些特性使该树脂材料非常适用于石油和天然气回收、半导体制造、汽车、航空航天、医疗、化学处理及其它工业用途。 该树脂在自然状态下，不透明，呈米色至浅棕色。 - 米色：KT-820 GF13 BG20

KetaSpire® KT-820 GF15 is a low flow, 15% glass-fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative to unreinforced KetaSpire® PEEK resin. The glass fiber content is optimized to provide a balance of strength and stiffness with toughness-related properties, such as impact resistance and elongation at break. The low fiberglass loading gives the resin improved surface aesthetics and reduced anisotropy over comparable 30% glass reinforced formulations. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases. These properties make it well-suited for applications in oil & gas, healthcare, transportation, electronics, chemical processing and other industrial uses. - Natural: KT-820 GF15 NT

KetaSpire KT- 820 CF30是中等流动性、 30 ％玻纤增强聚醚醚酮（ PEEK）。 该树脂的强度和刚度高于未增强KetaSpire PEEK树脂。玻纤增强树脂赋予结构性产品更高的机械强度，特别是工作温度接近300℃时。 KetaSpire PEEK按照最行业最高标准加工，以兼具各种出色的性能为特征，包括优异的耐磨损性、一流的抗疲劳性、易于熔融加工、高纯度、优异的耐有机物、酸和碱等化学物质的性能。 这些特性使得它非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。 -米色：KetaSpire KT-820 GF30 BG20 Black: KetaSpire KT-820 GF30 BK95

KetaSpire KT -820 NL是低流动未增强聚醚醚酮（PEEK ），以非润滑本色颗粒状供应。 KetaSpire PEEK按照行业最高标准生产，以兼具各种出色的性能为特征，包括优异的耐磨损性、一流的抗疲劳性、易于熔融加工、高纯度、优异的耐有机物、酸和碱等化学物质的性能。 这些特性使得它非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。 该树脂也有本色粗粉末状牌号KetaSpire KT- 820P供混合用。 也有本色(NT)或黑色(BK 95)润滑性树脂KT-820 可供。润滑牌号微量喷洒了硬脂酸钙（ 0.01 ％ ），以帮助塑料颗粒在塑化螺杆中输送。

Ketaspire KT-820 SL10是一种聚醚醚酮（PEEK）化合物。与标准PEEK相比，该牌号专门设计用于改善润滑性、减少摩擦。与其它耐磨损牌号相比，这一牌号不仅具有高润滑性、出色的延展性和韧性优于未改性的高粘度PEEK。此外，该产品具有高流动性，可以注塑复杂、难成型的薄壁件。 除了这些与众不同的特征外，该树脂还具有PEEK公认的超高性能，包括：即使在高温下也具有高机械强度和刚度、长期热氧化稳定性、耐疲劳性以及优异的耐化学性，能耐受包括酸、碱、有机物等各种苛刻化学环境。 这些有吸引力的性能组合使Ketaspire KT-820 SL10适用于运输、电子、化学处理和工业用途，包括石油和天然气勘探和生产用品。

KetaSpire® KT-820 SL30 is a polyetheretherketone (PEEK) compound designed to provide a balance of excellent mechanical properties, wear resistance and low coefficient of friction in both dry and externally lubricated applications. The resin is formulated with a ternary anti-friction/anti-wear additive system comprised of carbon fiber, graphite, and polytetrafluoroethylene (PTFE). KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in transportation, electronics, chemical processing, and industrial uses including oil and gas exploration and production. The resin is black in color in its natural state.

KetaSpire KT- 820 SL45是基于聚醚醚酮的树脂，专门设计用于需要极低磨损率和良好机械性能的需要使用外部润滑剂的产品。

KetaSpire KT -820是低流动级未增强聚醚醚酮（PEEK），呈润滑颗粒状。KetaSpire PEEK按照行业最高标准加工，以兼具不同的性能为特征，包括优异的耐磨损性、一流的抗疲劳性、易于熔融加工、高纯度、优异的耐有机物、酸和碱等化学物质的性能。 这些特性使得它非常适合医疗保健、交通运输、电子、化学处理和其它工业用途。KetaSpireKT -820可以很容易地使用常规注塑成型和挤出工艺进行加工。有本色粗粉末牌号KetaSpire KT- 820P供配混。 粒状KT- 820微量喷洒了润滑剂硬脂酸钙（ 0.01 ％ ），方便颗粒在塑化螺杆中的输送。有类似于非润滑本色低流量牌号KetaSpire KT -820 NL可供 。 - 黑色：KT-820 BK 95

KetaSpire® KT-820FP is the low-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color fine powder form suitable for compression molding. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing, and other industrial uses. The resin is also available as KetaSpire® KT-820 NT in a natural-color pellet form for injection molding and extrusion.

KetaSpire® KT-820P is a low flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color coarse powder form. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing, and other industrial uses. KetaSpire® KT-820P is intended for extrusion compounding. This powder is also available as KT-820NT in a natural-color pellet form for injection molding.

KetaSpire® KT-820SFP is the low flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-colored, super-fine powder form. This super-fine PEEK powder is suitable for water-borne coatings, electrostatically driven powder coatings, and resin pre-impregnation of continuous fiber composites. This super-fine powder is produced to a median particle size D50 of about 30 micrometers. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals, best in class fatigue resistance, high thermal resistance, high purity and ease of melt processing. These properties make KT-820SFP well-suited for applications in health care, transportation, electronics, chemical processing and other industrial uses. The resin is also available in a natural-colored pellet form under the grade name KT-820 NT for injection molding and extrusion

KetaSpire® KT-820UFP is the low flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-colored, ultra-fine powder form. This ultra-fine PEEK powder is suitable for water-borne coatings, electrostatically driven powder coatings and resin pre-impregnation of continuous fiber composites. This ultra-fine powder is produced to a median particle size D50 of about 10 micrometers. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals, best-in-class fatigue resistance, high thermal resistance, high purity and ease of melt processing. These properties make KT-820UFP well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. The resin is also available in a natural-colored pellet form under the grade name KT-820 NT for injection molding and extrusion.

KetaSpire® KT-850 is the intermediate-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color pellet form. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. - Natural: KT-850 NT