热塑性弹性体(TPE): EAA
产品 | 可用性 | 产品说明 |
---|---|---|
BYNEL™ 2002 | 北美洲 |
BYNEL™ Series 2000 resins are acid modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.
Applications
- BYNEL™ 2000 series resins adhere to a wide variety of materials. They are most often used to adhere to PE, EVA, Polyamide, ionomer, paper, aluminum foil, and printed films.
- BYNEL™ 2002 is designed for low melt temperature extrusion or coextrusion coating / laminating applications.
|
BYNEL™ 2022 | 北美洲 |
BYNEL™ Series 2000 resins are acid modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.
Applications
- BYNEL™ 2000 series resins adhere to a wide variety of materials. They are most often used to adhere to PE, EVA, Polyamide, ionomer, paper, aluminum foil, and printed films.
- BYNEL™ 2002 is designed for low melt temperature extrusion or coextrusion coating / laminating applications.
|
E-FLEX® I3265 | 亚太地区 |
Features
- E-FLEX I3265 is a family of ethylene acrylic acid (E/AA) copolymers, in which part of the acrylic acid is neutralized with Zn/Na ions
Application
- Golf ball cover consumer products
Drying
- Product is dried and packed with a moisture content of <0.08%. Should the packaging become damaged or be left open too long, then the material must be dried.A too high moisture content can lead to a reduction of optical and mechanical properties.
|
Escor™ 5000 | 非洲和中东 |
Escor 5000主要用于挤出涂覆、共挤涂覆和挤出复合。 可良好地粘合于极性基材、铝箔、金属膜、纸张、钢铁和玻璃表面。 提供与基材表面的粘合性和与共挤的低密度聚乙烯和乙烯醋酸乙烯酯的层间结合力的出色平衡。 薄膜中极佳的粘合性聚合体。
|
Escor™ 5020 | 非洲和中东 |
Escor 5020主要用于挤出涂覆和共挤涂覆。 可良好地粘合于极性基材、铝箔、金属膜、纸张、钢铁和玻璃表面。 提供与基材表面的粘合性和与共挤的低密度聚乙烯和乙烯醋酸乙烯酯的层间结合力的出色平衡
|
Escor™ 5050 | 北美洲 |
Escor 5000主要用于挤出涂覆、共挤涂覆和挤出复合。 可良好地粘合于极性基材、铝箔、金属膜、纸张、钢铁和玻璃表面。 提供与基材表面的粘合性和与共挤的低密度聚乙烯和乙烯醋酸乙烯酯的层间结合力的出色平衡。 薄膜中极佳的粘合性聚合体。
|
Escor™ 5080 | 非洲和中东 |
Escor™ 5080 resin is an ethylene acrylic acid copolymer characterized by high melt index and 10 wt% acrylic acid comonomer content. Escor™ 5080 resin easily combines processing and adhesion to polar materials. It can be formulated and UV-stabilized for use in outdoor applications.
|
Escor™ 5100 | 非洲和中东 |
Escor 5100主要用于挤出涂覆、共挤涂覆和挤出复合。 可良好地粘合于极性基材 、铝箔、金属膜、纸张、钢铁和玻璃表面。 用于包装酸性食品时还具有高抗结合 力。 聚酰胺用卓越的共挤粘性树脂。 卓越的热封性能:极低温度热封并具有高 热封强度、高热粘力和良好的抗污染热封性。 薄膜中极佳的粘合性聚合体。
|
Escor™ 5110 | 非洲和中东 |
Escor 5110主要用于高速低涂层重量的挤出涂覆和挤出复合。 可良好地粘合于极性基材、铝箔、金属膜、纸张、钢铁和玻璃表面。 对酸性和侵蚀性食品包装具有极高的抗结合力。 极低的热封和热起封温度,极高的最大热粘强度。
|
Escor™ 5150 | 北美洲 |
Escor™ 5150 resin is primarily intended for high speed, low coating weight extrusion coating and extrusion lamination. Escor™ 5150 resin offers the following advantages: excellent adhesion to polar substrates, aluminum foil, polyamide films, metallized films, papers, iron, steel, and glass; high bond resistance when used to pack acidic food products; very low sealing and hot tack initiation temperature; very high hot tack peak force.
|
Escor™ 5200 | 非洲和中东 |
Escor 5200 是一种乙烯丙烯酸共聚物,具有高共聚物单体成分。 Escor 5200可单独或作为混合配方中的一种成分用于粘合用途,适用要求中等粘度和对极性材料有良好的粘合性(金属、尼龙、玻璃等)的应用。
|
Escor™ 6000 | 非洲和中东 |
Escor 6000主要用于挤出涂覆和共挤涂覆。 Escor 6000是Escor 5000的高牵伸性 产品形式。 在高生产线速度下可实现极低的涂层重量。 可良好地粘合于极性基 材、铝箔、金属膜、纸张、钢铁和玻璃表面。 提供与基材表面的粘合性和与共挤 的低密度聚乙烯和乙烯醋酸乙烯酯的层间结合力的出色平衡
|
Generic EAA | 北美洲 |
This data represents typical values that have been calculated from all products classified as: Generic EAA
This information is provided for comparative purposes only.
|
Lucalen A 2910 M | 非洲和中东 |
Lucalen A2910M is a natural adhesive low density polyethelene copolymer with a high thermal stability. Due to the acrylic acid/acrylate copolymer (E/A) content this grade offers excellent adhesion to polar materials (i.e. epoxy resin, steel, aluminium, etc.). It is design to be used by our customer in 2-layer anti corrosion coating as well as in wire & cable compounds. The material is available in pellet form.
|
Lucalen A 3110 M Q 244 | 非洲和中东 |
Lucalen A3110M Q244 is a natural adhesive medium/high density polyethelene copolymer powder with a high thermal stability. Due to the acrilic acid/acrylate copolymer (E/A) content this grade offers excellent adhesion to polar materials (i.e. epoxy resin, steel, aluminium, etc.). It is design to be used by our customers in 3-layer anti corrosion coating applications where sprayable powder is requested. The material is available in powder form. The particle size distribution is mainly in the 90 - 500 µm range.
|
Lucalen A 3110 M | 非洲和中东 |
Lucalen A3110M is a natural adhesive medium/high density polyethelene copolymer with a high thermal stability. Due to the acrylic acyd/acrylate copolymer (E/A( content this grade offers excellent adhesion to polar materials (i.e. epoxy resin, steel, aluminium etc.). It is design to be used by our customers in 3-layer anti corrosion coating as well as in wire & cable compounds. The material is available in pellet form.
|
NUCREL™ 30707 | 北美洲 |
NUCREL™ 30707 is a copolymer of ethylene and acrylic acid, made with nominally 6.9 wt% acrylic acid. The resin is available for use in blown/cast film and extrusion coating operations. It can be used on both extrusion and coextrusion equipment designed to process polyethylene resins.
Uses
- Adhesives; Packaging; Sealants
Composition
- 6.9% By Weight Acrylic Acid comonomer content
|
NUCREL™ 30907 | 北美洲 |
NUCREL™ 30907 is an ethylene acid copolymer resin. The resin is available for use in conventional extrusion coating, extrusion coating, and extrusion laminating equipment designed to process polyethylene resin. This resin may also be used in conventional blown and cast film extrusion and coextrusion equipment
Composition
- 9.5% By Weight Acrylic Acid comonomer content
|
NUCREL™ 31001 | 北美洲 |
NUCREL™ 31001 is a copolymer of ethylene and acrylic acid, made with nominally 9.5 wt% acrylic acid. It is available for use in blown and cast film extrusion and coextrusion equipment.
Uses
- Adhesives; Packaging; Sealants
Composition
- 9.5% By Weight Acrylic Acid comonomer content
|
NUCREL™ 3990 | 北美洲 |
NUCREL™ 3990 is a copolumer of ethylene and acrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment.
Composition
- 9.5% By Weight Acrylic Acid comonomer content
|
NUCREL™ 3990L | 北美洲 |
NUCREL™ 3990L is a copolymer of ethylene and acrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment.
Composition
- 9.5% By Weight Acrylic Acid comonomer content
Characteristics/Benefits
- This is a version of NUCREL™ 3990 that has been further devolatilized for very sensitive applications
|
PRIMACOR™ 1321 | 北美洲 |
PRIMACOR™ 1321 Copolymer is an ethylene acrylic acid copolymer suitable for extruded blown and cast film.
PRIMACOR 1321 Copolymer has been specifically designed for use as an adhesive layer in composite films or sealant layer in flexible packaging structures.
PRIMACOR 1321 Copolymer exhibits:
- Good interlayer adhesion to PE and PA
- Good optical properties
- Excellent toughness and strength
- Excellent environmental stress crack and product resistance
- Good hot-tack and sealability
- Insensitivity to moisture
Applications:
- Multilayer films
- Food packaging
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 1410 | 北美洲 |
PRIMACOR™ 1410 Copolymer is an ethylene acrylic acid copolymer suitable for monolayer or coextrusion blown films.
PRIMACOR 1410 Copolymer has been specifically designed for use as a heat seal or adhesive layer in composite films.
PRIMACOR 1410 Copolymer exhibits:
- Excellent hot tack and sealability
- Excellent toughness and strength
- Excellent crack resistance
- Insensitivity to moisture
- Good optical properties
Applications:
- Speciality and skin packaging
- Multilayer films
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 1430 | 北美洲 |
PRIMACOR™ 1430 is an ethylene acrylic acid copolymer that provides good sealability, hot tack and excellent adhesion to polar (foil, nylon, etc.) materials. It also provides excellent toughness, clarity and tear resistance.
- Adhesive layer of sealant layer in flexible packaging structures
- For blown or cast film extrusion
- Used where adhesion to nylon or foil is desired
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3002 | 欧洲 |
PRIMACOR™ 3002 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination.
PRIMACOR 3002 Copolymer exhibits:
- Excellent Draw-down and edge stability.
- Excellent organoleptic properties.
- Excellent toughness and strength.
- Adhesion to paper, paperboards, metals and Polyethylene
- Excellent environmental stress crack and product resistance
- Excellent hot-tack and sealability
- Insensitivity to moisture
Applications:
- Food packaging
- Flexible packaging laminates
- Liquid packaging laminates
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3003 | 欧洲 |
PRIMACOR™ 3003 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination.
PRIMACOR 3003 Copolymer exhibits:
- Excellent draw-down and edge stability
- Excellent organoleptic properties
- Excellent toughness and strength
- Outstanding environmental stress crack and product resistance
- Excellent hot-tack and sealability
- Adhesion to paper, paperboard, metals and polyethylenes
- Insensitivity to moisture
Applications:
- Flexible packaging laminates
- Liquid packaging board laminates
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3004 | 亚太地区 |
PRIMACOR™ 3004 is an ethylene acrylic acid copolymer designed for extrusion/coextrusion coating and laminating. It provides excellent hot tack and adhesion to metallic, paper and polyethylene substrates with excellent heat seal strength, even through many oil and powdered products. This resin also offers outstanding resistance to delamination, as well as excellent toughness and environmental stress crack resistance (ESCR).
- Excellent draw down and edge stability
- Excellent product resistance
- Excellent hot tack, heat seal, toughness
- High performance sealant or tie layer
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3150 | 北美洲 |
PRIMACOR™ 3150 is an ethylene acrylic acid copolymer designed for extrusion/coextrusion coating and laminating resin for flexible packaging applications. It provides excellent adhesion to metallic, paper and polyethylene substrates, and offers good draw- down, heat sealability and oil and grease resistance.
- For extrusion/coextrusion coating and laminating applications
- Adhesion to metallic, paper and polyethylene substrates
- Cost effective sealant or tie resin for foil-based structures
- Moisture insensitivity
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3330 | 北美洲 |
PRIMACOR™ 3330 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications.
PRIMACOR 3330 Copolymer has been specifically designed for use as an adhesive resin for extrusion and coextrusion coating and extrusion lamination or sealant layer. PRIMACOR 3330 Copolymer exhibits:
- Excellent adhesion to metallic, paper and PE substrates.
- Excellent heat sealability and hot tack.
- Excellent toughness.
- Excellent oil and grease resistance.
- Insensitive to moisture.
Applications:
- Flexible packaging laminates
- Plastic tube laminates
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3340 | 北美洲 |
PRIMACOR™ 3340 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications.
PRIMACOR 3340 Copolymer has been specifically designed for use as a sealant and adhesive layer in flexible packaging and liquid packaging laminates.
PRIMACOR 3340 Copolymer exhibits:
- Excellent adhesion to metallic, paper and PE substrates
- Excellent heat sealability and hot tack
- Good oil grease resistance
- Insensitivity to moisture
Applications:
- Flexible packaging laminates
- Liquid packaging laminates
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3440 | 北美洲 |
PRIMACOR™ 3440 Copolymer resin is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications.
PRIMACOR 3440 Copolymer exhibits:
- Excellent heat sealability and hot tack.
- Excellent adhesion to metallic, paper and PE substrates
- Excellent toughness
- Excellent stress crack resistance
- Insensitivity to moisture
- Designed specifically for high line speeds
Applications:
- Flexible packaging laminates
- Liquid packaging laminates
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3460 | 北美洲 |
PRIMACOR™ 3460 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications.
PRIMACOR 3460 Copolymer has been specifically designed for use as a sealant and adhesive layer in flexible packaging laminates and thin paper coating.
PRIMACOR 3460 Copolymer exhibits:
- Excellent heat sealability and hot tack.
- Excellent adhesion to metallic, paper and PE substrates.
- Good stress crack resistance.
- Designed specifically for high line speeds and low processing temperature.
- Insensitive to moisture.
Applications:
- Flexible packaging
- Thin paper coating
- Metallic substrate lamination
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 3540 | 北美洲 |
PRIMACOR™ 3540 is an extrusion coating polymer.
Main Characteristics:
- Extrusion coating adhesive polymer
- Coextrusion coating adhesive in combination with select INSITE™ Technology based polyethylene resins
- Enhanced adhesion retention
- Complies with the requirements for use in contact with food of the EU-Directive 2002/72/EC. Contact a SK Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European countries and in addition gives info about imposed migration requirements.
- Complies with U.S. FDA 21 CFR 177.1310(b). Consult the regulations for complete details.
|
PRIMACOR™ 4608 | 北美洲 |
PRIMACOR™ 4608 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications.
PRIMACOR 4608 Copolymer has been specifically designed for use as a sealant and adhesive layer for flexible packaging and liquid packaging laminates.
PRIMACOR 4608 Copolymer exhibits:
- Excellent adhesion to metallic, paper, and PE substrates.
- Excellent heat sealability and hot-tack.
- Excellent draw down.
- Good oil grease resistance.
- Insensitivity to moisture.
Applications:
- Flexible packaging laminates
- Liquid packaging board laminates
Complies with:
- U.S. FDA 21 CFR 177.1310(a)(1)
- EU, No 10/2011
Consult the regulations for complete details.
|
PRIMACOR™ 5980I | 北美洲 |
- Low heat seal temperature, high hot tack
- High gloss, excellent clarity
- Excellent grease and oil resistance, water hold-out and excellent product resistance for flexible packaging applications
- Complies with:
- U.S. FDA 21 CFR 177.1310(a)(2)
Consult the regulations for complete details.
PRIMACOR™ 5980I is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other polar substrates. In dispersion form, it can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates.
Applications:
- Adhesives
- Laminations
- Foil priming
- Heat sealing
- Nonwoven binding
- Metal/paper coating
Outstanding Properties:
- Dispersible in aqueous amines and alkali
- "Clean" dispersion requires no salts, surfactants or solvents
- Dispersions use existing waterbourne application equipment
- High hot tack
- Low odor
|
PRIMACOR™ 5986 | 北美洲 |
- Low heat seal temperature, high hot tack
- High gloss, excellent clarity
- Excellent grease and oil resistance and excellent product resistance for flexible packaging applications
Complies with
- U.S. FDA 21 CFR 177.1310(a)(2)
Consult the regulations for complete details.
PRIMACOR™ 5986 is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other polar substrates. It can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates.
Applications:
- Adhesives
- Laminations
- Foil priming
- Heat sealing
- Metal/paper coating
|
PRIMACOR™ 698 | 北美洲 |
PRIMACOR™ 698 is a medium acid copolymer offering enhanced adhesion vs. LDPE, and thus potential for reduced processing temperatures or processing without substrate or melt pre-treatments.
Main Characteristics:
- Good adhesion to metallic, paper and PE Substrates
- Good heat sealability and hot-tack
- Excellent draw-down
- Low neck-in
- Complies with the requirements for use in contact with food of the EU-Directive 2002/72/EC. Contact a SK Sales office to obtain a detailed food contact compliance letter for this product.
- Complies with U.S. FDA 21 CFR 177.1310(b). Consult the regulations for complete details.
|
VINPOL™ EA0806 | 北美洲 |
VINPOL EA0806 is an ethylene acrylic acid copolymer designed for extrusion coating and lamination and offering excellent adhesion to polar substrates, aluminum foil, metalized films, paper, iron, steel, and glass. It also provides excellent interlayer adhesion with coextruded LDPE and EVA. Typical applications include laminate tubes, liquid packaging, cosmetic packaging, cable shielding, food packaging and hygiene packaging.
|
VINPOL™ EA08075 | 北美洲 |
VINPOL EA08075 is an ethylene acrylic acid copolymer designed for extrusion coating and lamination and offering excellent adhesion to polar substrates, aluminum foil, metalized films, paper, iron, steel, and glass. It also provides excellent interlayer adhesion with coextruded LDPE and EVA. Typical applications include laminate tubes, liquid packaging, cosmetic packaging, cable shielding, food packaging and hygiene packaging.
|
VINPOL™ EA0809 | 北美洲 |
VINPOL EA0809 is an ethylene acrylic acid copolymer designed for extrusion coating and lamination and offering excellent adhesion to polar substrates, aluminum foil, metalized films, paper, iron, steel, and glass. It also provides excellent interlayer adhesion with coextruded LDPE and EVA. Typical applications include laminate tubes, liquid packaging, cosmetic packaging, cable shielding, food packaging and hygiene packaging.
|