Home > Plastics > Materials > Formolene® > Formolene® 6535N - Datasheet

Formolene® 6535N Datasheet

Polypropylene Impact Copolymer

Supplied by Formosa Plastics Corporation, U.S.A.

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
Formolene® 6535N is an engineered, medium impact copolymer polypropylene. It was specifically developed to meet the OEM demands for automotive interior trim applications, with proven injection molding economy.

Material has been approved under Ford WSS-M4D638-B, GM16208-T1, DCX MS-DB-500 and Toyota TSM 5514G Class 2 for interior trim applications.

The optimal stiffness and impact balance also provides for utility in industrial applications including bins and crates, and small appliances.

This material is free of animal-derived content.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Impact Resistance
  • Good Stiffness
  • Impact Copolymer
  • No Animal Derived Components
 
Uses 
  • Automotive Interior Parts
  • Automotive Interior Trim
  • Crates
  • Industrial Applications
  • White Goods & Small Appliances
Agency Ratings 
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
ISO 527-2/50
Tensile Strength
     
Yield, Injection Molded 2
psi
ASTM D638
Yield, Injection Molded
psi
ISO 527-2/50
Tensile Strain
     
Yield, Injection Molded
%
ISO 527-2/50
Break, Injection Molded 2
%
ASTM D638
Break, Injection Molded
%
ISO 527-2/50
Flexural Modulus
     
1% Secant : Injection Molded 3
psi
ASTM D790
Chord  4
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     
0°F, Injection Molded
ft·lb/in
ASTM D256A
32°F, Injection Molded
ft·lb/in
ASTM D256A
73°F, Injection Molded
ft·lb/in
ASTM D256A
-40°F, Injection Molded
ft·lb/in²
ISO 180
0°F, Injection Molded
ft·lb/in²
ISO 180
73°F, Injection Molded
ft·lb/in²
ISO 180
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Injection Molded)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed, Injection Molded
°F
ASTM D648
66 psi, Unannealed
°F
ISO 75-2/Be
264 psi, Unannealed, Injection Molded
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/Ae
Features
Features may also be described by the following terms: Impact Copolymer, Good Stiffness, Good Impact Resistance, ADC, Animal Derived Materials, Animal Free.
Uses
Uses may also be described by the following terms: White Goods, Small Appliances, White Goods and Small Appliances, White Goods & Small Appliances.
Automotive Specifications
This plastic material has approval for 5 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), FORD (1), GM (2), TOYOTA (1).
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Available Documents
Processing - Film (English)
Processing - Injection Molding (English)
Processing - Sheet Extrusion (English)
Technical Datasheet - ISO (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
40.079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.