Ultramid® C40 L Datasheet

Polyamide 66/6 Copolymer

Supplied by BASF Corporation

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Ultramid C40 L is a lubricated high viscosity, copolymer PA6/66 grade for the production of monofilaments and blown film. Its well suited for the production of high transparency, nonsymetric blown film with reduced curl. Its very low melting point compared to standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Additive 
  • Lubricant
Features 
  • Copolymer
  • High Clarity
  • High Viscosity
  • Lubricated
 
Uses 
  • Blown Film
  • Monofilaments
 
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Apparent (Bulk) Density
g/cm³
 
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Viscosity Number (96% H2SO4 (Sulphuric Acid))
cm³/g
ISO 307
Moisture Content
%
ISO 15512
Pellet Shape
 
 
Pellet Size
mil
 
Relative Viscosity - 1% in 96% Sulfuric Acid
 
ISO 307
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
ISO 3146
Related Terminology
This supplier and product may also be known by these terms: PA666, PA66/6
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: High Viscosity, High Clarity.
Uses
Uses may also be described by the following terms: Blown Film, Monofilaments, Monofilament.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Available Documents
Processing - Injection Molding (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.