Bayblend® T85 XF Datasheet

Polycarbonate + ABS

Supplied by Covestro - Polycarbonates

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
(PC+ABS)-Blend; Vicat/B 120 temperature = 130°C; improved flow compared with T85
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Good Flow
RoHS Compliance 
Automotive Specifications 
Physical
Nominal Value
Unit
Test Method
Density (73°F)
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
ISO 1133
Molding Shrinkage 2
    ISO 2577
Across Flow : 500°F, 0,118 in
%
 
Flow : 500°F, 0,118 in
%
 
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2/1
Tensile Stress
    ISO 527-2/50
Yield, 73°F
psi
 
Break, 73°F
psi
 
Tensile Strain
    ISO 527-2/50
Yield, 73°F
%
 
Break, 73°F
%
 
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Notched Izod Impact Strength
    ISO 180/A
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Unnotched Izod Impact Strength
    ISO 180
-22°F
 
 
73°F
 
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/B50
--
°F
ISO 306/B120
CLTE
    ISO 11359-2
Flow : 73 to 131°F
in/in/°F
 
Transverse : 73 to 131°F
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Volume Resistivity (73°F)
ohms·cm
IEC 60093
Electric Strength (73°F, 0,0394 in)
V/mil
IEC 60243-1
Relative Permittivity
    IEC 60250
73°F, 100 Hz
 
 
73°F, 1 MHz
 
 
Dissipation Factor
    IEC 60250
73°F, 100 Hz
 
 
73°F, 1 MHz
 
 
Comparative Tracking Index (Solution A)
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0,03 in)
 
UL 94
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity 3 (500°F)
Pa·s
ISO 11443-A
Additional Information
Nominal Value
Unit
Test Method
ISO Shortname
 
 
Features
Features may also be described by the following terms: Good Flow.
Automotive Specifications
This plastic material has approval for 11 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (4), GM (7).
Available Documents
Technical Datasheet (Chinese (Traditional))
Technical Datasheet (Chinese)
Technical Datasheet (English)
Technical Datasheet (German)
Technical Datasheet (Japanese)
Notes
1Typical properties: these are not to be construed as specifications.
2150x105x3mm,, MT 80°C
31000s-1
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.