Home > Plastics > Materials > Latamid > Latamid 12 G/50 - Datasheet

Latamid 12 G/50 Datasheet

Polyamide 12

50% Glass Fiber

Supplied by LATI S.p.A.

View Complete Data Sheet Search 119000+ Data Sheets
Create Your Free Account or Login
Product Description
Polyamide 12 (PA12) based compound. Glass fibres.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber, 50% Filler by Weight
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage 2
    ISO 294-4
Across Flow : 0.0787 in
%
 
Flow : 0.0787 in
%
 
Water Absorption (73°F, 24 hr)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
    ISO 527-2/1
73°F
psi
 
140°F
psi
 
194°F
psi
 
248°F
psi
 
302°F
psi
 
Tensile Stress
    ISO 527-2/5
Break, 73°F
psi
 
Break, 140°F
psi
 
Break, 194°F
psi
 
Break, 248°F
psi
 
Break, 302°F
psi
 
Tensile Strain
    ISO 527-2/5
Yield, 73°F
%
 
Break, 73°F
%
 
Break, 140°F
%
 
Break, 194°F
%
 
Break, 248°F
%
 
Break, 302°F
%
 
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Continuous Use Temperature 3
°F
 
Vicat Softening Temperature
°F
ISO 306/B50
CLTE - Flow (86 to 212°F)
in/in/°F
ISO 11359-2
Related Terminology
This supplier and product may also be known by these terms: PA12
Generic Name
Generic Name may also be described by the following terms: PA12.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
260 MPa
320000 hr
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.