Miramid® SEP15C Datasheet

Polyamide 66

15% Glass Fiber

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Miramid® SEP15C is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Europe for injection molding.

Important attributes of Miramid® SEP15C are:
  • Chemical Resistant
  • Crystalline
  • Good Stiffness
  • Impact Modified
  • Impact Resistant

Typical applications include:
  • Automotive
  • Engineering/Industrial Parts
  • Sporting Goods
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber, 15% Filler by Weight
Additive 
  • Impact Modifier
Features 
  • Crystalline
  • Fuel Resistant
  • Good Flow
  • Good Impact Resistance
  • Good Stiffness
  • Grease Resistant
  • High Rigidity
  • Impact Modified
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Engineering Parts
  • Sporting Goods
 
Automotive Specifications 
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
ISO 1183 2
Melt Volume-Flow Rate (MVR) (275°C/5.0 kg)
--
cm³/10min
ISO 1133
Water Absorption
      ISO 62 2
Saturation
--
%
 
Equilibrium
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
ISO 527-2 2
Tensile Stress (Break)
psi
ISO 527-2 2
Tensile Strain (Break)
%
ISO 527-2 2
Flexural Modulus
psi
ISO 178
Flexural Stress 3
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
      ISO 179/1eA 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy impact strength
      ISO 179/1eU 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Dry
Conditioned
Unit
Test Method
Melting Temperature (DSC)
--
°F
ISO 3146
Related Terminology
Dry
This supplier and product may also be known by these terms: PA66
Conditioned
This supplier and product may also be known by these terms: PA66
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Good Stiffness, Good Flow, Good Impact Resistance, High Rigidity.
Uses
Dry
Uses may also be described by the following terms: Engineering Parts.
Automotive Specifications
Dry
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FMVSS (1).
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3Typical values for uncoloured product at 23°C
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.