Miramid® SP5S Datasheet

Polyamide 66

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Miramid® SP5S is a Polyamide 66 (Nylon 66) material. It is available in Europe for injection molding.

Important attributes of Miramid® SP5S are:
  • Flame Rated
  • Chemical Resistant
  • Good Mold Release
  • Impact Modified
  • Impact Resistant

Typical applications include:
  • Automotive
  • Construction Applications
  • Electrical/Electronic Applications
  • Engineering/Industrial Parts
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Impact Modifier
Features 
  • Fuel Resistant
  • Good Flow
  • Good Impact Resistance
  • Good Mold Release
  • Grease Resistant
  • Impact Modified
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Applications
  • Building Materials
  • Electrical Parts
  • Engineering Parts
 
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
ISO 1183 2
Water Absorption (Equilibrium)
--
%
ISO 62 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
ISO 527-2 2
Tensile Stress (Yield)
psi
ISO 527-2 2
Tensile Strain (Yield)
%
ISO 527-2 2
Flexural Stress 3 (3.5% Strain)
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
      ISO 179/1eA 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy impact strength
      ISO 179/1eU 2
-22°F
--
 
 
73°F
 
 
Hardness
Dry
Conditioned
Unit
Test Method
Ball Indentation Hardness
--
psi
ISO 2039-1
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
      ISO 75-2 2
66 psi
--
°F
 
264 psi
--
°F
 
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Volume resistivity
ohms·in
IEC 60093 2
Dielectric Constant (1 MHz)
 
IEC 60250
Comparative tracking index
--
 
IEC 60112 2
Flammability
Dry
Conditioned
Unit
Test Method
Burning Rate (0.0394 in)
--
in/min
FMVSS 302
Flame Rating (0.06 in)
--
 
UL 94
Burning Behav. at thickness h (0.0591 in)
--
 
ISO 1210 2
Glow Wire Flammability Index (0.04 in)
--
°F
IEC 60695-2-12
Related Terminology
Dry
This supplier and product may also be known by these terms: PA66
Conditioned
This supplier and product may also be known by these terms: PA66
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding, Good Flow, Good Impact Resistance.
Uses
Dry
Uses may also be described by the following terms: Engineering Parts, Automotive Applications, Automotive Sector.
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Conditioned
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3Typical values for uncoloured product at 23°C and 50% relative humidity
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.