Miramid® SX30CW Datasheet

Polyamide 66

30% Mineral

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Injection moulding grade, mineral-reinforced, heat stabilised for technical parts such as engine covers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral, 30% Filler by Weight
Uses 
  • Automotive Under the Hood
  • Engineering Parts
  • Housings
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Water Absorption
      ISO 62
Saturation, 73°F
--
%
 
Equilibrium, 73°F, 50% RH
--
%
 
Viscosity Number (96% H2SO4 (Sulphuric Acid))
--
cm³/g
ISO 307
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress (Break, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Flexural Stress (73°F)
--
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
      ISO 179/1eA
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
      ISO 179/1eU
-22°F
--
ft·lb/in²
 
73°F
 
 
Hardness
Dry
Conditioned
Unit
Test Method
Ball Indentation Hardness
--
psi
ISO 2039-1
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
ISO 75-2/A
Melting Temperature
--
°F
ISO 11357-3
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
ohms·cm
IEC 60093
Dielectric Constant (1 MHz)
--
 
IEC 60250
Dissipation Factor (1 MHz)
--
 
IEC 60250
Comparative Tracking Index (Solution A)
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Burning Rate (0,0394 in)
--
in/min
FMVSS 302
Flame Rating (0,06 in)
--
 
UL 94
Glow Wire Flammability Index (0,04 in)
--
°F
IEC 60695-2-12
Additional Information
Dry
Conditioned
Unit
Test Method
Automotive Materials (> 39,4 mil)
--
 
FMVSS 302
Related Terminology
Dry
This supplier and product may also be known by these terms: PA66
Conditioned
This supplier and product may also be known by these terms: PA66
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Uses
Dry
Uses may also be described by the following terms: Engineering Parts, Housings, Housing.
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Conditioned
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Extrusion
Dry
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.