Miramid® TE30CW Datasheet

Polyamide 66/6 Copolymer

30% Glass Fiber

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Injection moulding grade, glass fibre-reinforced, heat stabilized, technical parts for use under the bonnet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Features 
  • Crystalline
  • Fuel Resistant
  • Good Flow
  • Good Stiffness
  • Grease Resistant
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Applications
  • Automotive Exterior Trim
  • Engineering Parts
  • Housings
 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • (PA66+PA6)-GF30
Physical
Nominal Value
Unit
Test Method
Density
     
--
g/cm³
ISO 1183
--
lb/in³
ISO 1183 2
Viscosity Number
     
96% H2SO4 (Sulphuric Acid)
cm³/g
ISO 307
--
cm³/g
ISO 307, 1157, 1628 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
73°F
psi
ISO 527-2
--
psi
ISO 527-2 2
Tensile Stress
     
Break, 73°F
psi
ISO 527-2
Break
psi
ISO 527-2 2
Tensile Strain
     
Break, 73°F
%
ISO 527-2
Break
%
ISO 527-2 2
Flexural Stress (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     
73°F
ft·lb/in²
ISO 179/1eA
73°F
ft·lb/in²
ISO 179/1eA 2
Charpy Unnotched Impact Strength
     
73°F
ft·lb/in²
ISO 179/1eU
73°F
ft·lb/in²
ISO 179/1eU 2
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
ISO 11357-3
Flammability
Nominal Value
Unit
Test Method
Burning Rate (0,0394 in)
in/min
FMVSS 302
Flame Rating (0,06 in)
 
UL 94
Burning Behav. at thickness h (0,0591 in)
 
ISO 1210 2
Glow Wire Flammability Index (0,04 in)
°F
IEC 60695-2-12
Additional Information
Nominal Value
Unit
Test Method
Automotive Materials (> 39,4 mil)
 
FMVSS 302
Related Terminology
This supplier and product may also be known by these terms: PA666, PA66/6
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: Good Stiffness, Good Flow.
Uses
Uses may also be described by the following terms: Engineering Parts, Automotive Applications, Automotive Sector, Housings, Housing.
Available Documents
Processing - Injection Molding (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.