Miramid® TM30CW Datasheet

Polyamide 66/6 Copolymer

30% Mineral

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Injection moulding grade, mineral-reinforced, heat stabilised for under the bonnet covers, fuel lids
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Crystalline
  • Fuel Resistant
  • Good Dimensional Stability
  • Good Flow
  • Good Stiffness
  • Good Surface Finish
  • Grease Resistant
  • Heat Stabilized
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Applications
  • Caps
  • Closures
  • Engineering Parts
  • Housings
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • (PA66+PA6)-M30
Physical
Dry
Conditioned
Unit
Test Method
Density
       
--
--
g/cm³
ISO 1183
--
--
lb/in³
ISO 1183 2
Water Absorption
       
Saturation, 73°F
--
%
ISO 62
Saturation
--
%
ISO 62 2
Equilibrium, 73°F, 50% RH
--
%
ISO 62
Equilibrium
--
%
ISO 62 2
Viscosity Number
       
96% H2SO4 (Sulphuric Acid)
--
cm³/g
ISO 307
--
--
cm³/g
ISO 307, 1157, 1628 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
       
73°F
psi
ISO 527-2
--
psi
ISO 527-2 2
Tensile Stress
       
Break, 73°F
psi
ISO 527-2
Break
psi
ISO 527-2 2
Tensile Strain
       
Break, 73°F
%
ISO 527-2
Break
%
ISO 527-2 2
Flexural Modulus (73°F)
psi
ISO 178
Flexural Stress
      ISO 178
--
--
psi
 
73°F
--
psi
 
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
       
-22°F
--
ft·lb/in²
ISO 179/1eA
73°F
ft·lb/in²
ISO 179/1eA
-22°F
--
ft·lb/in²
ISO 179/1eA 2
73°F
ft·lb/in²
ISO 179/1eA 2
Charpy Unnotched Impact Strength
       
-22°F
--
ft·lb/in²
ISO 179/1eU
73°F
 
ISO 179/1eU
-22°F
--
ft·lb/in²
ISO 179/1eU 2
73°F
 
ISO 179/1eU 2
Hardness
Dry
Conditioned
Unit
Test Method
Ball Indentation Hardness
--
psi
ISO 2039-1
Thermal
Dry
Conditioned
Unit
Test Method
Melting Temperature
--
°F
ISO 11357-3, ISO 3146
Flammability
Dry
Conditioned
Unit
Test Method
Burning Rate (0.0394 in)
--
in/min
FMVSS 302
Flame Rating (0.06 in)
--
 
UL 94
Burning Behav. at thickness h (0.0591 in)
--
 
ISO 1210 2
Glow Wire Flammability Index (0.04 in)
--
°F
IEC 60695-2-12
Additional Information
Dry
Conditioned
Unit
Test Method
Automotive Materials (> 39.4 mil)
--
 
FMVSS 302
Related Terminology
Dry
This supplier and product may also be known by these terms: PA666, PA66/6
Conditioned
This supplier and product may also be known by these terms: PA666, PA66/6
Generic Name
Dry
Generic Name may also be described by the following terms: PA666, PA66/6.
Conditioned
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Dry
Features may also be described by the following terms: Good Stiffness, Good Flow, Good Dimensional Stability, Dimensionally Stable, Good Surface Finish, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Dry
Uses may also be described by the following terms: Engineering Parts, Automotive Applications, Automotive Sector, Closure Caps, Caps, Cap, Housings, Housing.
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Conditioned
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Extrusion
Dry
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.