Greenflex® MH 40 Datasheet

Ethylene Vinyl Acetate Copolymer

Supplied by Versalis S.p.A.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Greenflex MH 40 is an ethylene vinyl acetate copolymer (EVA) for injection moulding and extrusion.

Items produced with Greenflex MH 40 show high elasticity and good mechanical properties.

Main Application
Greenflex MH 40 is recommended for the production flexible items, foamed and crosslinked sheets for shoes.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Copolymer
  • Crosslinkable
  • Foamable
  • Food Contact Acceptable
  • Good Flexibility
  • High Elasticity
Uses 
  • Foam
  • Footwear
  • Sheet
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Vinyl Acetate Content
wt%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
ISO 527-2
Flexural Modulus (Injection Molded)
psi
ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
    ISO 868
Shore A, Injection Molded
 
 
Shore D, Injection Molded
 
 
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ISO 306/A
Melting Temperature
°F
Internal Method
Features
Features may also be described by the following terms: High Elasticity, Highly Elastic, Good Flexibility, Flexible.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.