InnoPlus HD6600B Datasheet

High Density Polyethylene

Supplied by PTT Global Chemical Public Company Limited

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
InnoPlus HD6200B and HD6600B are high density polyethylene blow molding grade with optimum balance of processability, environmental stress cracking resistance (ESCR) and impact strength. They are used for wide variety blow molding applications of small to medium size container and multi use grade from high ESCR to normal ESCR.

Typical Application : Personal care containers, Cosmetic containers, Detergent containers, Lubricant oil containers
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • High Density
  • High ESCR (Stress Crack Resist.)
Uses 
  • Containers
  • Cosmetic Packaging
  • Personal Care
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (ESCR) (25% Igepal, F50)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
    ASTM D638
Yield
psi
 
Break
psi
 
Tensile Elongation (Break)
%
ASTM D638
Apparent Bending Modulus
psi
ASTM D747
Flexural Modulus
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 2
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525 3
Peak Melting Temperature
°F
ASTM D3418
Additional Information
Nominal Value
Unit
Test Method
Blow Molding Die Temperature
°F
 
Blow Molding Temperature
°F
 
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Density, High Specific Gravity.
Uses
Uses may also be described by the following terms: Cosmetic Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Partial Break
3Rate A (50°C/h), Loading 1 (10 N)
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.