Advanced Composites ADX-5007 Datasheet

Compounded Polypropylene

Talc

Supplied by Advanced Composites, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Advanced Composites ADX-5007 is a Compounded Polypropylene product filled with talc. It is available in North America.

Characteristics include:
  • Impact Resistant
  • Scratch Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc
Features 
  • Good Scratch Resistance
  • High Impact Resistance
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow (0,118 in)
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Flexural Modulus
psi
ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-22°F
ft·lb/in
 
73°F
ft·lb/in
 
Instrumented Dart Impact 2 (-22°F, Totol Energy)
in·lb
ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Features
Features may also be described by the following terms: Scratch Resistant, Resists Scratches, Good Scratch Resistance, High Impact Resistance.
Available Documents
PP/TPO Processing & Troubleshooting (English)
Processing (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Cushion
in
 
Injection Notes
Injection Pressure: The preferred range is 50 to 60% of machine capacity
Notes
1Typical properties: these are not to be construed as specifications.
222,0 ft/sec
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.