POLYFORT® FPP 20 GFC LE K1400 Datasheet

Polypropylene Homopolymer

20% Glass Fiber

Supplied by A. Schulman Europe

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
20% glass fibre reinforced PP Homopolymer chemically coupled, high heat stabilized, low emission
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber, 20% Filler by Weight
Features 
  • Chemically Coupled
  • Heat Stabilized
  • Homopolymer
  • Low Emissions
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress (Break)
psi
ISO 527-2/1A/5
Tensile Strain (Break)
%
ISO 527-2/1A/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/Bf
264 psi, Unannealed
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Volume Resistivity
ohms·cm
IEC 60093
Flammability
Nominal Value
Unit
Test Method
Burning Rate
     
0.0787 in
in/min
FMVSS
0.0787 in
in/min
ISO 3795
Flammability Classification (0.06 in)
 
IEC 60695-11-10, -20
Additional Information
1.) Not for use in food contact applications
2.) Not for use in medical or pharmaceutical applications
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Emissions.
Available Documents
Technical Datasheet
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Regrind
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Notes
*Drying normally not necessary.
Low Emission grades are sensitive for shear-stress. Processing parameters determine the emission- and odor properties of the finished parts. Therefore moderate temperatures and moderate injection- and dozing rates are recommended.
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.