Home > Plastics > Materials > Jam > Jam 11X02 - Datasheet

Jam 11X02 Datasheet

Linear Low Density Polyethylene

Supplied by Jam Petrochemical Company

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
11X02 is a HP-LLDPE blown film grade designed for easy processing applications which combines balanced film physical properties with good opticals.

Features
  • General purpose
  • Easy processing
  • Good opticals

Applications
  • Blown film grade
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Additive 
  • Antiblock
  • Antioxidant 1
  • Slip
Features 
  • Antiblocking
  • Antioxidant
  • Good Clarity
  • Good Processability
  • Slip
Uses 
  • Blown Film
  • Film
 
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Blown film (0.6 to 7.1 mil)
 
 
Secant Modulus
    ASTM D882
2% Secant, MD : 0.98 mil, Blown Film
psi
 
2% Secant, TD : 0.98 mil, Blown Film
psi
 
Tensile Strength
    ASTM D882
MD : Yield, 0.98 mil, Blown Film
psi
 
TD : Yield, 0.98 mil, Blown Film
psi
 
MD : Break, 0.98 mil, Blown Film
psi
 
TD : Break, 0.98 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 0.98 mil, Blown Film
%
 
TD : Break, 0.98 mil, Blown Film
%
 
Dart Drop Impact (0.98 mil, Blown Film)
g
ASTM D1709A
Elmendorf Tear Strength
    ASTM D1922
MD : 0.98 mil, Blown Film
g
 
TD : 0.98 mil, Blown Film
g
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.984 mil, Blown Film)
 
ASTM D1790
Haze (0.984 mil, Blown Film)
%
ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Blow-up Ratio - Blown film (1.0 mil)
mil
 
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock, Good Processability, Easy Processing, Good Clarity.
Uses
Uses may also be described by the following terms: Blown Film.
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Thermal antioxidant
2Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.