Jam 14X01 Datasheet

Linear Low Density Polyethylene

Supplied by Jam Petrochemical Company

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
14X01 is a HP-LLDPE blown film grade of excellent processability which is particularly suited for film applications requiring a good balance between stiffness and strength.

Features
  • High stiffness
  • Excellent processability
  • Good balance between stiffness and strength

Applications
  • Blown film grade
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
 
Additive 
  • Antiblock
  • Antioxidant
  • Slip
Features 
  • Antiblocking
  • Antioxidant
  • Excellent Processability
  • High Stiffness
  • Slip
Uses 
  • Blown Film
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Film Thickness
mil
 
Secant Modulus
    ASTM D882
2% Secant, MD : 0.98 mil, Blown Film
psi
 
2% Secant, TD : 0.98 mil, Blown Film
psi
 
Tensile Strength
    ASTM D882
MD : Yield, 0.98 mil, Blown Film
psi
 
TD : Yield, 0.98 mil, Blown Film
psi
 
MD : Break, 0.98 mil, Blown Film
psi
 
TD : Break, 0.98 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 0.98 mil, Blown Film
%
 
TD : Break, 0.98 mil, Blown Film
%
 
Dart Drop Impact (0.98 mil, Blown Film)
g
ASTM D1709
Elmendorf Tear Strength
    ASTM D1922
MD : 0.98 mil, Blown Film
g
 
TD : 0.98 mil, Blown Film
g
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.984 mil, Blown Film)
 
ASTM D2457
Haze (0.984 mil, Blown Film)
%
ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Blow-up Ratio
 
 
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock, High Stiffness, Excellent Processability.
Uses
Uses may also be described by the following terms: Blown Film.
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.