Home > Plastics > Materials > Jam > Jam 14ZF8 - Datasheet

Jam 14ZF8 Datasheet

Linear Low Density Polyethylene

Supplied by Jam Petrochemical Company

View Complete Data Sheet Search 119000+ Data Sheets
Create Your Free Account or Login
Product Description
14ZF8 is a HP-LLDPE grade, suitable for blown film applications, targetting high mechanical properties, with an excellent processability. The 14ZF8 HP-LLDPE, alone or in blend with LDPE, is suitable for small pipe extrusion, especially for agricultural lateral-dripping pipes. The 14ZF8 is suitable for extrusion of blow molded soft containers.

Features
  • Easy processability
  • High mechanical properties

Applications
  • Blown film
  • Small pipe extrusion
  • Agricultrual lateral-dripping pines
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
 
Additive 
  • Antiblock
  • Antioxidant
  • Slip
Features 
  • Antiblocking
  • Antioxidant
  • Excellent Processability
  • Slip
 
Uses 
  • Agricultural Applications
  • Blown Containers
  • Blown Film
  • Piping
 
Processing Method 
  • Blown Film
  • Extrusion Blow Molding
  • Pipe Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Film Thickness
mil
 
Secant Modulus
    ASTM D882
2% Secant, MD : 0.98 mil, Blown Film
psi
 
2% Secant, TD : 0.98 mil, Blown Film
psi
 
Tensile Strength
    ASTM D882
MD : Yield, 0.98 mil, Blown Film
psi
 
TD : Yield, 0.98 mil, Blown Film
psi
 
MD : Break, 0.98 mil, Blown Film
psi
 
TD : Break, 0.98 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 0.98 mil, Blown Film
%
 
TD : Break, 0.98 mil, Blown Film
%
 
Dart Drop Impact (0.98 mil, Blown Film)
g
ASTM D1709
Elmendorf Tear Strength
    ASTM D1922
MD : 0.98 mil, Blown Film
g
 
TD : 0.98 mil, Blown Film
g
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.984 mil, Blown Film)
 
ASTM D2457
Haze (0.984 mil, Blown Film)
%
ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Blow-up Ratio
 
 
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock, Excellent Processability.
Uses
Uses may also be described by the following terms: Blow Containers, Blown Container, Blown Film, Piping, Pipe.
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.