Jam 26560 Datasheet

Linear Low Density Polyethylene

Supplied by Jam Petrochemical Company

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
26560 is a LLDPE injection molding grade well suited for fast cycles applications requiring low stiffness of the final item, like housewares, toys, and lids.

Features
  • Fast cycles applications
  • Low stiffness of the final item

Applications
  • Injection molding grade
  • Housewares, toys, and lids
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
 
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Fast Molding Cycle
 
Uses 
  • Household Goods
  • Lids
  • Toys
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
    ASTM D638
Yield, Compression Molded
psi
 
Break, Compression Molded
psi
 
Tensile Elongation (Break, Compression Molded)
%
ASTM D638
Flexural Modulus (Compression Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256A
-58°F, Compression Molded
ft·lb/in
 
32°F, Compression Molded
ft·lb/in
 
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Heat Deflection Temperature - Compression Molded
°F
ASTM D648
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.