Home > Plastics > Materials > Jam > Jam 486H2 - Datasheet

Jam 486H2 Datasheet

High Density Polyethylene

Supplied by Jam Petrochemical Company

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
486H2 is a HDPE copolymer for blown film, general purposes. This grade is wall suited for film applications requiring a good pracessability, and outstanding mechanical properties.

Features
  • Grade under final development, to be industrialised.

Applications
  • Blown Film
  • High Mechanicals
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
 
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  • Good Processability
Uses 
  • Blown Film
  • General Purpose
 
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
ASTM D1238
Flow Rate Ratio
 
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Secant Modulus
    ASTM D882
2% Secant, MD : 0.59 mil, Blown Film
psi
 
2% Secant, TD : 0.59 mil, Blown Film
psi
 
Tensile Strength
    ASTM D882
MD : Break, 0.59 mil, Blown Film
psi
 
TD : Break, 0.59 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 0.59 mil, Blown Film
%
 
TD : Break, 0.59 mil, Blown Film
%
 
Dart Drop Impact (0.59 mil, Blown Film)
g
ASTM D1709A
Additional Information
Nominal Value
Unit
Test Method
Titanium
ppm
 
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Blown Film.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.