XENOY™ Resin 5220U - Americas Datasheet

Polycarbonate + PBT

Supplied by SABIC

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Unreinforced PBT+PC Alloy. Impact Modified. Improved retention of mechanical properties under UV exposure. Excellent low temperature impact and chemical resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
 
Additive 
  • Impact Modifier
Features 
  • Chemical Resistant
  • Impact Modified
  • Low Temperature Impact Resistance
  • UV Resistant
 
Uses 
  • Appliances
  • Automotive Applications
  • Automotive Exterior Parts
  • Construction Applications
  • Electrical/Electronic Applications
  • Electronic Displays
  • Household Goods
  • Industrial Applications
  • Lawn and Garden Equipment
  • Lenses
  • Lighting Applications
  • Medical/Healthcare Applications
  • Non-specific Food Applications
  • Outdoor Applications
  • Packaging
  • Sporting Goods
Processing Method 
  • Injection Molding
  • Sheet Extrusion
 
Multi-Point Data 
  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
  • Compressive Stress vs. Strain (ASTM D695)
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Flexural DMA (ASTM D4065)
  • Pressure-Volume-Temperature (PVT - Zoller Method)
  • Shear DMA (ASTM D4065)
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
Also Available In 
  • Asia Pacific
  • Europe
 
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Specific Volume
in³/lb
ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/5.0 kg)
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (250°C/5.0 kg)
in³/10min
ISO 1133
Molding Shrinkage
    Internal Method
Flow : 0.126 in
in/in
 
Across Flow  2
in/in
 
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Outdoor Suitability
 
UL 746C
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
-- 3
psi
ASTM D638
-- 4
psi
ASTM D638
--
psi
ISO 527-2/1
Tensile Strength
     
Yield 5
psi
ASTM D638
Yield
psi
ISO 527-2/50
Break 5
psi
ASTM D638
Break
psi
ISO 527-2/50
Tensile Elongation
     
Yield 5
%
ASTM D638
Yield
%
ISO 527-2/50
Break 5
%
ASTM D638
Break
%
ISO 527-2/50
Flexural Modulus
     
1.97 in Span 6
psi
ASTM D790
-- 7
psi
ISO 178
Flexural Stress
     
-- 7, 8
psi
ISO 178
Yield, 1.97 in Span 6
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 9 (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact
     
-40°F
ft·lb/in
ASTM D256
-22°F
ft·lb/in
ASTM D256
73°F
ft·lb/in
ASTM D256
-22°F 10
ft·lb/in²
ISO 180/1A
73°F 10
ft·lb/in²
ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed, 0.252 in
°F
ASTM D648
264 psi, Unannealed, 0.126 in
°F
ASTM D648
264 psi, Unannealed, 0.252 in
°F
ASTM D648
264 psi, Unannealed, 0.157 in, 2.52 in Span 10
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ASTM D1525 11
--
°F
ISO 306/B50
--
°F
ISO 306/B120
CLTE
     
Flow : -40 to 104°F
in/in/°F
ASTM E831, ISO 11359-2
Transverse : -40 to 104°F
in/in/°F
ASTM E831
Transverse : -40°F
in/in/°F
ISO 11359-2
RTI Elec
°F
UL 746
RTI Imp
°F
UL 746
RTI Str
°F
UL 746
Electrical
Nominal Value
Unit
Test Method
Arc Resistance 12
 
ASTM D495
Comparative Tracking Index (CTI)
 
UL 746
High Amp Arc Ignition (HAI) 13
 
UL 746
High Voltage Arc Tracking Rate (HVTR)
 
UL 746
Hot-wire Ignition (HWI)
 
UL 746
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.06 in)
 
UL 94
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland, SABIC Innovative Plastics, SABIC Americas, Saudi Basic Industries Corporation
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Medical Applications, Lawn and Garden Equipment, Lawn Equipment, Garden Equipment, Household Goods, Housewares, Automotive Applications, Automotive Sector, Food Applications, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Electronic Displays, Lenses, Lens.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Suggested Shot Size
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Vent Depth
in
 
Injection Notes
Injection Molding Parameters
  • Drying Time (Cumulative): 8 hrs
Extrusion Notes
Sheet Extrusion Parameters
  • Drying Temperature: 110 to 115°C
  • Drying Time: 4 to 6 hrs
  • Drying Time (Cumulative): 8 hrs
  • Maximum Moisture Content: 0 to 0.02%
  • Melt Temperature: 245 to 275°C
  • Barrel - Zone 1 Temperature: 170 to 205°C
  • Barrel - Zone 2 Temperature: 195 to 255°C
  • Barrel - Zone 3 Temperature: 205 to 280°C
  • Barrel - Zone 4 Temperature: 205 to 280°C
  • Adapter Temperature: 225 to 280°C
  • Die Temperature: 230 to 280°C
  • Roll Stack Temperature - Top: 70 to 80°C
  • Roll Stack Temperature - Middle: 75 to 80°C
  • Roll Stack Temperature - Bottom: 80 to 95°C
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.20 in/min
42.0 in/min
5Type I, 2.0 in/min
60.051 in/min
70.079 in/min
8at Yield
980*10*4 sp=62mm
1080*10*4 mm
11Rate A (50°C/h), Loading 2 (50 N)
12Tungsten Electrode
13Surface
 
UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.