EPLON 6 GFR 30 BK Datasheet

Polyamide 6

30% Glass Fiber

Supplied by EPSAN Plastik SAN. ve TiC. A.S.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Eplon 6 is glass fiber reinforced polyamide 6 and is suitable for injection moulding.

This product is available in black and in colours on request.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
 
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Appearance 
  • Black
  • Colors Available
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density (73°F)
g/cm³
ISO 1183
Molding Shrinkage
    ISO 294-4
Across Flow : 0.118 in
%
 
Flow : 0.118 in
%
 
Water Absorption (Equilibrium, 73°F, 50% RH)
%
ISO 62
Ash Content
%
ISO 3451-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress (Break, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Flexural Modulus (73°F)
psi
ISO 178
Flexural Stress (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 73°F)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Melting Temperature (DSC)
°F
ISO 3146
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.06 in)
 
UL 94
Additional Information
TEST CONDITIONS: Laboratory conditions are 23 ±2°C and 45-55 % RH.
Related Terminology
This supplier and product may also be known by these terms: PA6
Generic Name
Generic Name may also be described by the following terms: PA6.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2019. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.