Mecoline I RDX 1201 F Datasheet

Thermoplastic

Supplied by Melos GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
A flame retardant, halogen-free and low smoke, oil resistant compound. Max. operating temperature 125°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Halogen Free
  • High Heat Resistance
  • Irradiation Crosslinkable
  • Low Smoke Emission
  • Oil Resistant
Uses 
  • Insulation
  • Wire & Cable Applications
 
Wire Types 
  • HI3
  • HJ1
  • HM3
  • HM5
  • SHF2
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Mass-Flow Rate (MFR) (160°C/21.6 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
    IEC 811-1-1
-- 2
psi
 
-- 3
psi
 
Tensile Strain
    IEC 811-1-1
Break 2
%
 
Break 3
%
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 7619
Thermal
Nominal Value
Unit
Test Method
Hot Pressure Test - penetration 4h at 140°C
%
IEC 811-3-1
Hot Set 4
    IEC 540
Elongation after unloading
%
 
Elongation under load
%
 
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air
    IEC 811-1-2
311°F, 1008 hr
%
 
329°F, 480 hr
%
 
356°F, 144 hr
%
 
Change in Tensile Strain at Break in Air
    IEC 811-1-2
311°F, 1008 hr
%
 
329°F, 480 hr
%
 
356°F, 144 hr
%
 
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity 5
    IEC 60093
73°F
ohms·cm
 
194°F
ohms·cm
 
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
ASTM D2863
Features
Features may also be described by the following terms: Irradiation Crosslinkable, Zero Halogen Content, Halogen Free, Low Smoke Emission, High Heat Resistance, Heat Resistant.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Adapter Temperature
°F
 
Head Temperature
°F
 
Die Temperature
°F
 
Extruder Screw L/D Ratio
 
 
Extruder Screw Compression Ratio
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2After crosslinking
3Before crosslinking
4at 200°C/15min/0.2 MPa
5500V
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.