Home > Plastics > Materials > Mecoline > Mecoline S RDX 1203 F - Datasheet

Mecoline S RDX 1203 F Datasheet

Thermoplastic

Supplied by Melos GmbH

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
Halogen-free, low smoke, highly oil and extra fuel resistant radiation cross-linkable, flame retardant compound for thin wall insulation of wire for Rolling Stock, Offshore and Marine/Aerospace applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Fuel Resistant
  • Halogen Free
  • High Heat Resistance
  • Irradiation Crosslinkable
  • Low Smoke Emission
  • Oil Resistant
Uses 
  • Aerospace Applications
  • Marine Applications
  • Power Cable Jacketing
  • Telecommunications
  • Thin-walled Insulation
  • Wire & Cable Applications
Wire Types 
  • EM 104
  • HM1
  • HM3
  • SHF2
  • SW4
Agency Ratings 
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Mass-Flow Rate (MFR) (150°C/21.6 kg)
g/10 min
ISO 1133
Mooney Viscosity (ML 1+4, 302°F)
MU
DIN 53523
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
    IEC 811-1-1
-- 2
psi
 
-- 3
psi
 
Tensile Strain
    IEC 811-1-1
Break 2
%
 
Break 3
%
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 7619
Thermal
Nominal Value
Unit
Test Method
Hot Set 4
    IEC 540
Elongation under load
%
 
Residual elongation
%
 
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air
    IEC 811-1-2
248°F, 240 hr
%
 
302°F, 168 hr
%
 
Change in Tensile Strain at Break in Air
    IEC 811-1-2
248°F, 240 hr
%
 
302°F, 168 hr
%
 
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
ASTM D2863
Features
Features may also be described by the following terms: Irradiation Crosslinkable, Zero Halogen Content, Halogen Free, Low Smoke Emission, High Heat Resistance, Heat Resistant.
Uses
Uses may also be described by the following terms: Thin walled insulation, thin-wall insulation, thin wall insulation, Wire and Cable Applications, Wire & Cable Applications.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EN (1), IEC (1).
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Adapter Temperature
°F
 
Head Temperature
°F
 
Die Temperature
°F
 
Extruder Screw L/D Ratio
 
 
Extruder Screw Compression Ratio
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2After crosslinking
3Before crosslinking
4at 200°C/15min/0.2 MPa
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.