Mold Max® 30 Datasheet

Silicone

Supplied by Smooth-On, Inc

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.

Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin).

Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Good Colorability
Uses 
  • Mold Making
  • Prototyping
 
Appearance 
  • Pink
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D1475
Specific Volume
in³/lb
ASTM D1475
Molding Shrinkage - Flow
in/in
ASTM D2566
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
psi
ASTM D412
Tensile Strength (Break)
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength 2
lbf/in
ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Pot Life
min
 
Thermoset Mix Viscosity
cP
ASTM D2393
Demold Time
min
 
Additional Information
Nominal Value
Unit
Test Method
Mixing Ratio
 
 
Operating Temperature
°F
 
Features
Features may also be described by the following terms: Good Colorability.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Die B
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.