Aurora PVC AP1250 Series AAMA Datasheet

Rigid Polyvinyl Chloride

Supplied by Aurora Plastics, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
A high rate, midrange gloss, PVC powder, extrusion compound for exterior/interior applications.

Typical test results for ASTM D-4216. This is a Rigid PVC formulation per the requirements of AAMA 303-05. Testing was performed on actual window parts with a wall thickness of 0.100". This material meets/exceeds cell class 1-20131-13** as required in ASTM D-4726. Testing was performed by Dallas Laboratory, Inc., July 2006.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Medium Gloss
Forms 
  • Powder
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
PVC Cell Classification
 
ASTM D4216
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (72°F)
psi
ASTM D638
Tensile Strength (Yield, 72°F)
psi
ASTM D638
Flexural Modulus (72°F)
psi
ASTM D790
Flexural Strength (72°F)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (72°F)
ft·lb/in
ASTM D256
Drop Impact Resistance
    ASTM D4226
72°F, Extruded at 380 to 390° F melt temperature 2
in·lb/mil
 
72°F, Extruded at 380 to 390° F melt temperature 3
in·lb/mil
 
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness 4 (Shore D, 72°F)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
CLTE - Flow (72°F)
in/in/°F
ASTM D696
Flammability
Nominal Value
Unit
Test Method
Burning Rate
    ASTM D635
AEB
 
 
ATB
 
 
Features
Features may also be described by the following terms: Medium Gloss.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
3Procedure B
4Instantaneous
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.