Abstron IM17SHG Datasheet

Acrylonitrile Butadiene Styrene + Acrylic (PMMA)

Supplied by Bhansali Engineering Polymers Limited

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Abstron IM17SHG is an Acrylonitrile Butadiene Styrene + Acrylic (PMMA) (ABS+Acrylic) product. It is available in Asia Pacific.

Characteristics include:
  • Flame Rated
  • High Gloss
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • High Gloss
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0,126 in, Injection Molded)
psi
ASTM D638
Flexural Modulus 3 (0,252 in, Injection Molded)
psi
ASTM D790
Flexural Strength 3 (Yield, 0,252 in, Injection Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
73°F, 0,126 in, Injection Molded
ft·lb/in
 
73°F, 0,252 in, Injection Molded
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
ASTM D785
Pencil Hardness 4
 
ASTM D3363
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load 5 (264 psi, Annealed, 0,252 in, Injection Molded)
°F
ASTM D648A
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0,13 in)
 
UL 94
Features
Features may also be described by the following terms: High Gloss.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0,20 in/min
30,20 in/min
445°, 7.5 N
5Annealed at 85°C for 2 hr
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.