SABIC® Vestolen A RELY 5922R 10000 Datasheet

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
SABIC® Vestolen A RELY 5922R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its resistance against slow crack growth (SCG) the material SABIC® Vestolen A RELY 5922R 10000 is considered as PE100-RC and may be used for no dig applications. This material meets (inter)national standards for use in gas, drinking water and waste water piping. MRS class ISO 12162 MPa = 10.0 (PE 100).

This product is not intended for and must not be used in any pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Carbon Black: 2%
Features 
  • Bimodal Molecular Weight Distribution
  • Crack Resistant
  • High Density
Uses 
  • Piping
Agency Ratings 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ISO 1133
190°C/2.16 kg
g/10 min
 
190°C/5.0 kg
g/10 min
 
FNCT - ESCR  2 (176°F)
month
ISO 16770
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.0787 in, Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Stress (Yield, 0.0787 in, Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Strain (Yield, 0.0787 in, Compression Molded)
%
ISO 527-2/1BA/50
ESCR (Strain Hardening) - Gp
psi
Internal Method
Notch Pipe Test
month
ISO 13479
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F, Compression Molded
ft·lb/in²
 
73°F, Compression Molded
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Melting Temperature (DSC)
°F
DIN 53765
Oxidation Induction Time - Compression Molded (410°F)
min
ISO 11357-6
Additional Information
Nominal Value
Unit
Test Method
MRS Classification
psi
ISO 12162
RAL Number
 
 
Features
Features may also be described by the following terms: Good Crack Resistance, Crack Resistant, High Density, High Specific Gravity, Bimodal, Bimodal Molecular Weight Distribution, Bimodal MW Distribution.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ISO (1).
Available Documents
Processing - Extrusion & Thermoforming (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
22% Arkopal N100, 4 MPa
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.