Home > Plastics > Materials > Kepital® > Kepital® F10-02 - Datasheet

Kepital® F10-02 Datasheet

Acetal (POM) Copolymer

Supplied by Korea Engineering Plastics Co., Ltd

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
Kepital® 
F10-02
  • A high-viscosity grade for extrusion of round bars, sheets, and tubes
  • Suitable for extrusion molding of thick-walled, void-free, and sink mark-reduced parts
Kepital® 
F10-02
High viscosity grade for general purpose, utilized in not only injection molding but also extrusion.F10-02 is good for thick-walled section where void and sink is concerned.
General Kepital® 
F10-02
Kepital® 
F10-02
Material Status 
  • Commercial: Active
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • Latin America
  • North America
Features 
  • Copolymer
  • High Viscosity
  • High Viscosity
Uses 
  • Sheet
  • Thick-walled Parts
  • Tubing
--
RoHS Compliance 
--
Automotive Specifications 
--
Processing Method 
  • Extrusion
  • Injection Molding
--
Resin ID (ISO 1043)
  • POM
--
Physical Kepital® 
F10-02
Kepital® 
F10-02
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage - Flow
      Internal Method
0.118 in 2
--
%
 
0.118 in
--
%
 
Water Absorption (Equilibrium, 73°F, 50% RH)
%
ISO 62
Mechanical Kepital® 
F10-02
Kepital® 
F10-02
Unit
Test Method
Tensile Modulus
--
psi
ISO 527-2
Tensile Stress
       
--
--
psi
ISO 527-2/50
--
--
psi
ISO 527-2
Tensile Strain
      ISO 527-2
Yield
%
 
Break
--
%
 
Nominal Tensile Strain at Break
--
%
ISO 527-2
Flexural Modulus
      ISO 178
--
--
psi
 
73°F
--
psi
 
Flexural Stress
      ISO 178
--
--
psi
 
73°F
--
psi
 
Impact Kepital® 
F10-02
Kepital® 
F10-02
Unit
Test Method
Charpy Notched Impact Strength
       
-22°F
--
ft·lb/in²
ISO 179/1eA
73°F
--
ft·lb/in²
ISO 179
73°F
--
ft·lb/in²
ISO 179/1eA
Thermal Kepital® 
F10-02
Kepital® 
F10-02
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Melting Temperature
      ISO 11357-3
--
--
°F
 
-- 3
--
°F
 
CLTE - Flow
in/in/°F
ISO 11359-2
Electrical Kepital® 
F10-02
Kepital® 
F10-02
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Volume Resistivity
ohms·cm
IEC 60093
Electric Strength
V/mil
IEC 60243-1
Flammability Kepital® 
F10-02
Kepital® 
F10-02
Unit
Test Method
Flame Rating
--
 
UL 94
Related Terminology
Kepital® 
F10-02
This supplier and product may also be known by these terms: Polyacetal
Kepital® 
F10-02
This supplier and product may also be known by these terms: Polyacetal
Generic Name
Kepital® 
F10-02
Generic Name may also be described by the following terms: Polyacetal.
Kepital® 
F10-02
Generic Name may also be described by the following terms: Polyacetal.
Features
Kepital® 
F10-02
Features may also be described by the following terms: High Viscosity.
Kepital® 
F10-02
Features may also be described by the following terms: High Viscosity.
Uses
Kepital® 
F10-02
Uses may also be described by the following terms: Tubing, Tube, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
Automotive Specifications
Kepital® 
F10-02
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (2).
Available Documents
Kepital® 
F10-02
Technical Datasheet (English)
Injection Kepital® 
F10-02
Kepital® 
F10-02
Unit
 
Drying Temperature
--
°F
 
Drying Time
--
hr
 
Suggested Max Moisture
--
%
 
Hopper Temperature
--
°F
 
Rear Temperature
--
°F
 
Middle Temperature
--
°F
 
Front Temperature
--
°F
 
Nozzle Temperature
--
°F
 
Mold Temperature
--
°F
 
Back Pressure
--
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
2100mm diameter
310°C/min
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.