Adiprene® L 100 Datasheet

Polyurethane (Polyether, TDI)

Supplied by Chemtura Corporation

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
ADIPRENE L 100 urethane elastomer is one of a series of liquid urethane polymers which can be cured to a strong, rubbery solid by reaction of the isocyanate groups with polyamine compounds. When cured with MBCA¹ curing agent, ADIPRENE L 100 yields vulcanizates in the 88 to 92 Shore A hardness range. Lower hardness values and special properties can be obtained with other curing systems. Cured ADIPRENE L 100 has high tensile strength and resilience, as well as excellent resistance to abrasion, compression set, oils, solvents, oxidation, ozone, and low temperatures.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
 
Features 
  • Abrasion Resistant
  • High Tensile Strength
  • Low Temperature Resistant
  • Oil Resistant
  • Oxidation Resistant
  • Ozone Resistant
  • Resilient
  • Solvent Resistant
Uses 
  • Coating Applications
Forms 
  • Liquid
Processing Method 
  • Casting
  • Spraying
 
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow
in/in
ASTM D955
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
    ASTM D412
100% Strain
psi
 
300% Strain
psi
 
Tensile Strength
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength
     
-- 2
lbf/in
ASTM D624
Split
lbf/in
ASTM D470
Compression Set (158°F, 22 hr)
%
ASTM D395B
Bayshore Resilience
%
ASTM D2632
Clash-Berg Modulus
    ASTM D1043
-70°F
psi
 
-40°F
psi
 
0°F
psi
 
75°F
psi
 
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
CLTE - Flow
    ASTM D696
-32 to 32°F
in/in/°F
 
32 to 75°F
in/in/°F
 
75 to 212°F
in/in/°F
 
212 to 302°F
in/in/°F
 
Thermal Conductivity
Btu·in/hr/ft²/°F
ASTM C177
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
     
Hardener
 
 
Resin
 
 
Pot Life (212°F)
min
 
Demold Time (212°F)
min
 
Post Cure Time (158°F)
hr
 
Additional Information
Nominal Value
Unit
Test Method
Abrasion Index - NBS
 
 
Features
Features may also be described by the following terms: High Tensile Strength, Good Abrasion Resistance, Abrasion Resistant, Low Temperature Resistant, Low Temperature Performance.
Available Documents
Technical Datasheet (English)
Uncured Properties
Nominal Value
Unit
Test Method
Curing Time (212°F)
hr
 
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.