Home > Plastics > Materials > KIBISAN® > KIBISAN® PN-117C - Datasheet

KIBISAN® PN-117C Datasheet

Styrene Acrylonitrile

Supplied by CHI MEI CORPORATION

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
KIBISAN® PN-117C is a Styrene Acrylonitrile (SAN) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.

Characteristics include:
  • Flame Rated
  • RoHS Compliant
  • High Flow
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • High Flow
RoHS Compliance 
Resin ID (ISO 1043)
  • >SAN<
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
-- 2
 
ASTM D792
73°F
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
ASTM D1238
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Molding Shrinkage
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     
Yield 3
psi
ASTM D638
Yield
psi
ISO 527-2/50
Break
psi
ISO 527-2/50
Tensile Elongation
     
Break 3
%
ASTM D638
Break
%
ISO 527-2/50
Flexural Modulus
     
-- 4
psi
ASTM D790
-- 5
psi
ISO 178
Flexural Strength
     
-- 4
psi
ASTM D790
-- 5
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179
Notched Izod Impact
     
73°F, 0.126 in
ft·lb/in
ASTM D256
73°F, 0.252 in
ft·lb/in
ASTM D256
73°F
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
264 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
264 psi, Annealed
°F
ASTM D648, ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ASTM D1525 6, ISO 306/A50 6
--
°F
ISO 306/B50
CLTE - Flow
in/in/°F
ISO 11359-2
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.06 in)
 
UL 94
Related Terminology
This supplier and product may also be known by these terms: ChiMei
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Available Documents
Processing (English)
Technical Datasheet - ASTM (Chinese)
Technical Datasheet - ASTM (English)
Technical Datasheet - ISO (Chinese)
Technical Datasheet - ISO (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Holding Pressure
psi
 
Back Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
223°C
30.24 in/min
40.11 in/min
50.079 in/min
6Rate A (50°C/h), Loading 1 (10 N)
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.