Home > Plastics > Materials > Lustran® > Lustran® 248 - Datasheet

Lustran® 248 Datasheet

Acrylonitrile Butadiene Styrene

Supplied by INEOS Styrolution Group GmbH

View Complete Data Sheet Search 119000+ Data Sheets
Create Your Free Account or Login
Product Description
Lustran® 248 resin is a high-gloss, medium-impact grade of ABS (Acrylonitrile Butadiene Styrene). This general-purpose injection molding grade offers a good balance of physical properties.

FEATURES
  • High gloss
  • Good rigidity
  • Medium impact strength
  • UL94 HB rated

APPLICATIONS
  • Toys
  • Small appliances
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
 
Features 
  • General Purpose
  • High Gloss
  • Medium Impact Resistance
  • Medium Rigidity
 
Uses 
  • Appliances
  • Toys
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isochronous Stress vs. Strain (ISO 11403-1)
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR)
    ASTM D1238
220°C/10.0 kg
g/10 min
 
230°C/3.8 kg
g/10 min
 
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength (Yield, 73°F)
psi
ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-40°F
ft·lb/in
 
73°F
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
66 psi, Annealed
°F
 
264 psi, Unannealed
°F
 
264 psi, Annealed
°F
 
Vicat Softening Temperature
°F
ASTM D1525 2
CLTE - Flow
in/in/°F
ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Features
Features may also be described by the following terms: High Gloss, Medium Rigidity, Medium Impact Resistance.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Mold Temperature
°F
 
Screw L/D Ratio
 
 
Screw Compression Ratio
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 1 (10 N)
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.