EQUATE PE EFDA-7047 Datasheet

Linear Low Density Polyethylene

Supplied by EQUATE Petrochemical Company KSCC

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
EFDA-7047 is a linear low-density polyethylene (LLDPE) resin for tubular blown film extrusion. Films made from this resin have good toughness, high tensile strength and puncture resistance. EFDA-7047 does not contain any slip or antiblocking agent.

APPLICATIONS
  • Industrial liners.
  • Blown film stretch wrap.
  • Heavy-duty films.
  • General-purpose blown films for a variety of applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Features 
  • Food Contact Acceptable
  • Good Toughness
  • High Tensile Strength
  • Low Density
  • Puncture Resistant
Uses 
  • Film
  • General Purpose
  • Liners
  • Stretch Wrap
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
 ASTM D792
Bulk Density
lb/ft³
 ASTM D1895
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
1% Secant, MD : 0,98 mil, Blown Film
psi
  
1% Secant, TD : 0,98 mil, Blown Film
psi
  
Tensile Strength
     ASTM D882
MD : Break, 0,98 mil, Blown Film
psi
  
TD : Break, 0,98 mil, Blown Film
psi
  
Dart Drop Impact (Blown Film)
g
 ASTM D1709A
Elmendorf Tear Strength 2
     ASTM D1922
MD : 1,0 mil
g/mil
  
TD : 1,0 mil
g/mil
  
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0,984 mil, Blown Film)
 
 ASTM D2457
Haze (0,984 mil, Blown Film)
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Puncture Energy 2 (1,0 mil)
in·lb/mil
 Internal Method
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Puncture Resistance, Puncture Resistant, High Tensile Strength, Low Density, Low Specific Gravity.
Uses
Uses may also be described by the following terms: Stretch Wrap.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Die Gap: >1.8 mm
Notes
1Typical properties: these are not to be construed as specifications.
2Blown Film
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.