InnoPlus LL9641U Datasheet

Linear Low Density Polyethylene

Supplied by PTT Global Chemical Public Company Limited

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
InnoPlus LL9641U/LL9641UP are hexene co-polymer based linear low density polyethylene designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide an excellent stiffness and a good balance between impact strength and environmental stress cracking resistance.

Typical Applications : InnoPlus LL9641U/LL9641UP can be used to produce variety applications such as general molding, toys & playground equipment, outdoor storage containers, medium to large water tanks and chemical tanks.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Copolymer
  • Hexene Comonomer
  • High Stiffness
  • Low Density
  • UV Resistant
Uses 
  • Containers
  • General Purpose
  • Tanks
  • Toys
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (ESCR) (100% Igepal, Compression Molded, F50)
hr
ASTM D1693A
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
    ASTM D638
Yield, Compression Molded
psi
 
Break, Compression Molded
psi
 
Tensile Elongation (Break, Compression Molded)
%
ASTM D638
Flexural Modulus (Compression Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 2 (Compression Molded)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ASTM D1525
Features
Features may also be described by the following terms: Hexene Comonomer, High Stiffness, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Low Density, Low Specific Gravity.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Partial Break
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.