ABS Proquigel RF-70 Datasheet

Acrylonitrile Butadiene Styrene

Supplied by Proquigel

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Formulated for high performance both at low and high temperatures. It possesses a high tensile strength and excellent impact resistance. Ideal for use in refrigerator and freezer liners where stress-cracking, toughness, high gloss and wear are essential requisites.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Chemical Resistant
  • Good Impact Resistance
  • High Gloss
  • High Strength
 
Uses 
  • Appliance Components
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Vacuum Forming
 
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength (Break)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
73°F, 0.126 in
ft·lb/in
 
73°F, 0.244 in
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Features
Features may also be described by the following terms: High Strength, Good Impact Resistance, Good Chemical Resistance, Chemical Resistant, High Gloss.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts.
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.