Queo™ 0201 Datasheet

Ethylene-based Plastomer

Supplied by Borealis AG

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Queo 0201 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst.

CAS-No.: 26221-73-8

Applications
Queo 0201 Demonstrated applications include:

  • Seal layers in lamination and flexible barrier films
  • Tunnel linings
  • High strength flexible films
  • Flexible low voltage insulation
  • Heat shrinkable display film
  • Halogen free flame retardant compounds
  • Specialty stretch film applications
  • Blow moulding
  • PP film toughness modification
  • Soft foams, e.g. artificial wine corks
  • Roof coverings

Additives
Queo 0201 contains processing stabilizers

Special Features
Queo 0201 is optimised to deliver:

  • Excellent environmental stress cracking resistance (ESCR)
  • Unrivalled sealing and hot tack properties at low temperature
  • High clarity
  • Flexibility
  • Low amount of extractables
  • Versatile blending with other polyolefins in film, extrusion and moulding applications.
  • Outstanding toughness
  • Outstanding puncture resistance
  • Low temperature impact strength
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Flame Retardant
  • Processing Stabilizer
 
Features 
  • Flame Retardant
  • Good ESCR (Stress Crack Resist.)
  • Good Flexibility
  • Good Heat Shrinkability
  • Good Toughness
  • Halogen Free
  • Heat Sealable
  • High Clarity
  • High Strength
  • Low Extractables
  • Low Temperature Heat Sealability
  • Low Temperature Impact Resistance
  • Octene Comonomer
  • Puncture Resistant
Uses 
  • Blow Molding Applications
  • Film
  • Foam
  • Insulation
  • Laminates
  • Liners
  • Low Voltage Insulation
  • Plastics Modification
  • Stretch Wrap
  • Synthetic Cork
Processing Method 
  • Blow Molding
  • Extrusion
  • Film Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Density (73°F)
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Environmental Stress-Cracking Resistance (ESCR) (Injection Molded)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Injection Molded)
psi
ISO 527-2
Tensile Strain (Break, Injection Molded)
%
ISO 527-2
Flexural Modulus (Injection Molded)
psi
ISO 178
Films
Nominal Value
Unit
Test Method
Elastic Modulus - MD
psi
ASTM D882A
Seal Initiation Temperature
°F
ASTM F88
Dart Drop Test 2
lbf/in
ASTM D1709
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F, Injection Molded)
 
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ISO 306/A
Melting Temperature
°F
ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
ASTM D2457
Haze
%
ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Puncture Resistance - Energy to Break
ft·lb/in
Internal Method
Features
Features may also be described by the following terms: High Clarity, Good Flexibility, Flexible, Zero Halogen Content, Halogen Free, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Puncture Resistance, Puncture Resistant, High Strength, Good Toughness, Tough, Low Temperature Heat Sealability, Low Temperature Heat Seal, Octene Comonomer, Low Extractables, Good Heat Shrinkability, Good Environmental Stress Cracking Resistance, Good ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Plastics Modification, Plastic Modification, Stretch Wrap, Low Voltage Insulation, Synthetic Cork.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Blown Film, Monsanto Dart
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.