Queo™ 8210 Datasheet

Ethylene-based Plastomer

Supplied by Borealis AG

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Queo 8210 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst.

CAS-No.: 26221-73-8

Applications
Queo 8210 Demonstrated applications include:

  • Compounds
  • Impact modification of injection moulded PP
  • Extrusion coating
  • Soft foams, e.g. artificial wine corks
  • Halogen free flame retardant compounds
  • Sound deadening sheets

Additives
Queo 8210 contains processing stabilizers

Special Features
Queo 8210 is optimised to deliver:

  • Outstanding toughness
  • Low temperature flex-cracking and impact resistance
  • Outstanding puncture resistance
  • High clarity
  • Low temperature impact strength
  • High filler and oil acceptance
  • High flexibility and surface softness
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Flame Retardant
  • Processing Stabilizer
 
Features 
  • Flame Retardant
  • Good Impact Resistance
  • Good Toughness
  • Halogen Free
  • High Clarity
  • High Flexibility
  • Low Temperature Impact Resistance
  • Octene Comonomer
  • Puncture Resistant
  • Soft
Uses 
  • Acoustic Barrier
  • Compounding
  • Foam
  • Plastics Modification
  • Sheet
  • Synthetic Cork
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density (73°F)
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Environmental Stress-Cracking Resistance (ESCR) (Injection Molded)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Injection Molded)
psi
ISO 527-2
Tensile Strain (Break, Injection Molded)
%
ISO 527-2
Flexural Modulus (Injection Molded)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F, Injection Molded)
 
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
    ISO 868
Shore A
 
 
Shore D
 
 
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ISO 306/A
Melting Temperature
°F
ISO 11357-3
Additional Information
Nominal Value
Unit
Test Method
Coating Speed
ft/sec
Internal Method
Total Neck-In 2
in
Internal Method
Features
Features may also be described by the following terms: High Clarity, Zero Halogen Content, Halogen Free, Good Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Puncture Resistance, Puncture Resistant, Good Toughness, Tough, Octene Comonomer, High Flexibility.
Uses
Uses may also be described by the following terms: Plastics Modification, Plastic Modification, Compounding, Compounds, Synthetic Cork.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2100 m/min
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.