Achieve™ Advanced PP7123KNE1 Datasheet

Polypropylene Impact Copolymer

Supplied by ExxonMobil

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
A medium impact copolymer resin designed for appliance applications requiring high gloss and good stiffness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
 
Features 
  • Good Processability
  • High Gloss
  • High Stiffness
  • Medium Flow
  • Medium Impact Resistance
  • Nucleated
Uses 
  • Appliance Components
  • Appliances
  • Consumer Applications
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ExxonMobil Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     
Yield 2
psi
ASTM D638
Yield, 73°F
psi
ISO 527-2/50
Tensile Elongation
     
Yield 2
%
ASTM D638
Yield
%
ISO 527-2/50
Flexural Modulus
     
1% Secant  3
psi
ASTM D790A
1% Secant  4
psi
ASTM D790B
-- 5
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
-4°F
ft·lb/in²
 
32°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Notched Izod Impact
     
0°F
ft·lb/in
ASTM D256A
73°F
ft·lb/in
ASTM D256A
-22°F
ft·lb/in²
ISO 180/1A
-4°F
ft·lb/in²
ISO 180/1A
32°F
ft·lb/in²
ISO 180/1A
73°F
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed
°F
ASTM D648
66 psi, Unannealed
°F
ISO 75-2/Bf
66 psi, Annealed
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
Optical
Nominal Value
Unit
Test Method
Gloss (60°)
 
ASTM D523
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use. For detailed Product Stewardship information, please contact Customer Service.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES
Features
Features may also be described by the following terms: High Gloss, Medium Impact Resistance, High Stiffness, Good Processability, Easy Processing, Medium Flow, Medium Melt, Medium MFI.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts.
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
22,0 in/min
30,051 in/min
40,51 in/min
50,079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.