Addisil™ 6101 Datasheet

Silicone

Supplied by Momentive Performance Materials Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Addisil 6101, Momentive Performance Material's Silicone adhesive, is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.

Addisil 6101 silicone adhesive is a black, thixotropic paste, which can be applied to vertical or overhead surfaces.

Key Features and Benefits
  • One component product - no mixing required
  • Room temperature storage
  • Very fast cure at elevated temperature (in a range of 110°C to 230°C)
  • Primerless adhesion to many types of substrates (e.g. aluminum, copper, stainless steel, glass, enamel, ceramic)
  • No formation of cure by-products; low linear shrinkage
  • Non-corrosive to metals and sensitive substrates
  • Outstanding performance over a wide temperature range
  • Service temperature -50°C to 250°C
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Bondability
  • Fast Cure
  • Good Adhesion
  • Heat Cure
  • Non-Corrosive
  • Thixotropic
Uses 
  • Adhesives
  • Sealants
 
Appearance 
  • Black
Forms 
  • Paste
Thermoset
Nominal Value
Unit
 
Shelf Life (< 81°F)
wk
 
Features
Features may also be described by the following terms: Heat Cure, Bondability, Bondable, Fast Cure, Fast Curing, Non-Corrosive, Non Corrosive, Good Adhesion.
Available Documents
Technical Datasheet (English)
Uncured Properties
Nominal Value
Unit
 
Density
g/cm³
 
Curing Time
     
392°F
hr
 
347°F
hr
 
302°F
hr
 
257°F
hr
 
Cured Properties
Nominal Value
Unit
 
Shore Hardness (Shore A)
 
 
Tensile Strength
psi
 
Tensile Elongation at Break
%
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.