Addisil™ 8101 Datasheet

Silicone

Supplied by Momentive Performance Materials Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Addisil 8101 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.

Addisil 8101 is a grey thixotropic material

Key Features and Benefits
  • One component product - no mixing required
  • Room temperature storage
  • Very fast cure at elevated temperature (in a range of 110°C to 230°C)
  • Primerless adhesion to many types of substrates (e.g. PBT, PA, phenolic resins, copper, nickel, aluminum, stainless steal, brass, ceramic and glass)
  • No formation of cure by-products; low linear shrinkage
  • Non-corrosive to metals and sensitive substrates
  • Excellent dielectric properties
  • Outstanding performance over a wide temperature range
  • Service temperature -50°C to 250°C
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Bondability
  • Fast Cure
  • Good Adhesion
  • Heat Cure
  • Low Shrinkage
  • Non-Corrosive
  • Thixotropic
Uses 
  • Adhesives
  • Sealants
 
Appearance 
  • Grey
Thermoset
Nominal Value
Unit
Test Method
Shelf Life (< 81°F)
wk
 
Features
Features may also be described by the following terms: Heat Cure, Bondability, Bondable, Fast Cure, Fast Curing, Good Adhesion, Low Shrinkage, Non-Corrosive, Non Corrosive.
Available Documents
Technical Datasheet (English)
Uncured Properties
Nominal Value
Unit
Test Method
Density
g/cm³
 
Viscosity
Pa·s
 
Curing Time (347°F)
hr
 
Cured Properties
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 
Tensile Strength
psi
 
Tensile Elongation at Break
%
 
Electric Strength (0,0787 in)
V/mil
DIN 53481
Relative Permittivity (50 Hz, 0,0394 in)
 
DIN 53483
Volume Resistivity (0,0394 in)
ohms·cm
DIN 53481
Dissipation Factor (50 Hz, 0,0394 in)
 
DIN 53483
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.