Home > Plastics > Materials > Starex > Starex VH-0800 - Datasheet

Starex VH-0800 Datasheet

Acrylonitrile Butadiene Styrene

Supplied by LOTTE ADVANCED MATERIALS CO., LTD.

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
Starex VH-0800 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Starex VH-0800 include appliances and electrical/electronic applications.

Characteristics include:
  • Flame Rated
  • Flame Retardant
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Flame Retardant
Uses 
  • Appliances
  • Electrical/Electronic Applications
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
Natural
 
ASTM D792
Natural
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
ASTM D1238, ISO 1133
Molding Shrinkage
     
Flow : 0.126 in
in/in
ASTM D955
Across Flow : 0.126 in
in/in
ASTM D955
Across Flow : 0.126 in
%
ISO 2577
Flow : 0.126 in
%
ISO 2577
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
-- 2
psi
ASTM D638
--
psi
ISO 527-2/50
Tensile Strength
     
Yield 2
psi
ASTM D638
Yield
psi
ISO 527-2/50
Break 2
psi
ASTM D638
Break
psi
ISO 527-2/50
Tensile Elongation
     
Break 2
%
ASTM D638
Break
%
ISO 527-2/50
Flexural Modulus
     
-- 3
psi
ASTM D790
-- 4
psi
ISO 178
Flexural Strength
     
-- 3
psi
ASTM D790
-- 4
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 5 (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact
     
73°F, 0.125 in
ft·lb/in
ASTM D256
73°F, 0.250 in
ft·lb/in
ASTM D256
73°F 5
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785, ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed, 0.252 in
°F
ASTM D648
66 psi, Unannealed, 0.157 in
°F
ISO 75-2/B
66 psi, Annealed, 0.157 in
°F
ISO 75-2/B
264 psi, Unannealed, 0.252 in
°F
ASTM D648
264 psi, Unannealed, 0.157 in
°F
ISO 75-2/A
264 psi, Annealed, 0.157 in
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/B50
--
°F
ISO 306/B120
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94
0.06 in
 
 
0.12 in
 
 
0.24 in
 
 
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Available Documents
Processing (English)
Technical Datasheet - ASTM (English)
Technical Datasheet - ISO (English)
Injection
Nominal Value
Unit
 
Drying Temperature
     
--
°F
 
Desiccant Dryer
°F
 
Drying Time
     
--
hr
 
Desiccant Dryer
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Back Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
40.079 in/min
5Thickness: 4mm
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.