MALAT 37N007 - 8689 Datasheet

Polybutylene Terephthalate

Supplied by AD majoris

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
MALAT 37N007 - 8689 is a polybutylene terephthalate , intended for injection moulding. The product is available in natural and black (MALAT 37N007 - 8229) but other colours can be provided on request

They combine high mechanical, thermal and electrical properties with excellent chemical resistance.

APPLICATIONS
MALAT 37N007 - 8689 is intended for the injection moulding of electrical components and automotive applications including interior, exterior and electrical and mechanical systems, such as:
  • Electrical appliance components
  • Switches and connector housings
  • Dashboard components
  • Door handles and pillar trim
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Chemical Resistant
  • Good Electrical Properties
  • Recyclable Material
Uses 
  • Appliance Components
  • Automotive Electronics
  • Automotive Exterior Parts
  • Automotive Interior Parts
  • Electrical Housing
  • Electrical Parts
  • Handles
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow  2 (0,118 in)
%
  
Water Absorption (24 hr, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Stress 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Ball Pressure Test (392°F)
 
 NF C 62-411
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohms·cm
 ASTM D257
Dielectric Strength (0,0787 in)
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
50 Hz
 
  
1 kHz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
50 Hz
 
  
1 kHz
 
  
1 MHz
 
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
 UL 94
Glow Wire Ignition Temperature (0,08 in, 30 sec)
°F
 IEC 60695-2-13
Oxygen Index
%
 ISO 4589-2
Features
Features may also be described by the following terms: Good Electrical Properties, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Electrical Housings, Electrical Housing.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Back pressure: Moderate
Notes
1Typical properties: these are not to be construed as specifications.
2Plate 100x100x3 mm
3at Break
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.