MALAT 9383GFR300 Datasheet

Polybutylene Terephthalate

30% Glass Fiber

Supplied by AD majoris

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
MALAT 9383GFR300 is a 30 % glass fibre reinforced polybutylene terephthalat, halogen free, intended for injection moulding.

Classified V0 according to UL94 norm, MALAT 9383GFR300 is available in natural but other colours can be provided on request.

This technical datasheet is valid for all our compounds MALAT 9383GFR300: natural or other colours.

MALAT 9383GFR300 combines high mechanical, thermal and electrical properties with excellent chemical resistance and dimensional stability.

APPLICATIONS
MALAT 9383GFR300 is intended for the injection moulding of electrical components and automotive applications including interior, exterior and electrical and mechanical systems, such as:
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Features 
  • Chemical Resistant
  • Good Dimensional Stability
  • Good Electrical Properties
  • Halogen Free
  • Recyclable Material
Uses 
  • Automotive Electronics
  • Automotive Exterior Parts
  • Automotive Interior Parts
  • Electrical Parts
 
Appearance 
  • Colors Available
  • Natural Color
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage 2 (0.0787 in)
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Stress 3
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Melting Temperature (DSC)
°F
ISO 3146
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
ASTM D257
Volume Resistivity
ohms·cm
ASTM D257
Dielectric Strength (0.0787 in)
V/mil
ASTM D149
Comparative Tracking Index (Solution A)
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94
0.031 in
 
 
0.06 in
 
 
Glow Wire Flammability Index
    IEC 60695-2-12
0.04 in
°F
 
0.08 in
°F
 
Glow Wire Ignition Temperature (0.08 in)
°F
IEC 60695-2-13
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Good Electrical Properties, Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Back pressure: Moderate
Notes
1Typical properties: these are not to be construed as specifications.
2Plate 100x100x2 mm
3at Break
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.