Rilsan® HT CESV BLACK P010-HP TL Datasheet

Polyphthalamide

Supplied by Arkema Technical Polymers

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Rilsan® HT CESV BLACK P010-HP TL is a flexible polyphthalamide produced from a renewable source, typical used to replace metal in tubing for high-temperature automotive, transportation and other demanding technical applications requiring high burst resistance.

Main applications:
  • Thermoplastic lines for automotive & transportation applications such as high temperature air/vacuum, agressive media and oil management systems, cooling and selective catalyst reduction lines etc.

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Heat Stabilizer
  • UV Stabilizer
 
Features 
  • Heat Stabilized
  • Light Stabilized
  • UV Stabilized
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Profile Extrusion
 
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/5.0 kg)
--
cm³/10min
ISO 1133
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
--
psi
ISO 527-2
Tensile Stress (Yield)
--
psi
ISO 527-2
Tensile Strain (Yield)
--
%
ISO 527-2
Nominal Tensile Strain at Break
--
%
ISO 527-2
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
      ISO 179/1eA
-22°F
--
ft·lb/in²
 
73°F
--
ft·lb/in²
 
Thermal
Dry
Conditioned
Unit
Test Method
Melting Temperature 2
--
°F
ISO 11357-3
Additional Information
Dry
Conditioned
Unit
Test Method
Renewable Carbon Conent
--
%
ASTM D6866
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Available Documents
Dry
Technical Datasheet (English)
Extrusion
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.