Rilsan® HT CZM 30 BLACK TLD Datasheet

Polyphthalamide

30% Glass Fiber

Supplied by Arkema Technical Polymers

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Rilsan® HT CZM 30 BLACK TLD resin is a polyphthalamide produced from a renewable source. This grade is glass fiber-reinforced, formulated and designed for injection molding for high-temperature applications.

Main applications:
  • Automotive & transportation quick connector for flexible fuels and powertrain applications.
  • High temperature injection molding.

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Additive 
  • Heat Stabilizer
  • Mold Release
  • UV Stabilizer
Features 
  • Good Mold Release
  • Heat Stabilized
  • High Heat Resistance
  • Light Stabilized
  • Renewable Resource Content
  • UV Stabilized
Uses 
  • Automotive Applications
  • Connectors
 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/2.16 kg)
--
cm³/10min
ISO 1133
Water Absorption
      ISO 62
Saturation, 73°F
--
%
 
Equilibrium, 73°F, 50% RH
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
--
psi
ISO 527-2
Tensile Stress (Break)
--
psi
ISO 527-2
Tensile Strain (Break)
--
%
ISO 527-2
Impact
Dry
Conditioned
Unit
Test Method
Charpy Unnotched Impact Strength
      ISO 179/1eU
-22°F
--
ft·lb/in²
 
73°F
--
ft·lb/in²
 
Hardness
Dry
Conditioned
Unit
Test Method
Shore Hardness (Shore D, 15 sec)
--
 
ISO 7619-1
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
       
66 psi, Unannealed
--
°F
ISO 75-2/B
264 psi, Unannealed
--
°F
ISO 75-2/A
Glass Transition Temperature 2
--
°F
ISO 11357-2
Melting Temperature 2
--
°F
ISO 11357-3
Additional Information
Dry
Conditioned
Unit
Test Method
Renewable Carbon Conent
--
%
ASTM D6866
Features
Dry
Features may also be described by the following terms: High Heat Resistance, Heat Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content, Good Mold Release, Easy Release, Good Demolding.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Available Documents
Dry
Technical Datasheet (English)
Injection
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.