Product Description | ||||
This resin is a general purpose homopolymer polypropylene (flake ) . This product meets US FDA 21 CFR 177.1520.
|
||||
General | ||||
Material Status
|
|
|||
Availability
|
|
|||
Features
|
|
|||
Uses
|
|
|||
Agency Ratings
|
|
|||
Forms
|
|
|||
Processing Method
|
|
Physical |
Nominal Value
|
Unit
|
Test Method
|
Density
|
|
g/cm³
|
ASTM D1505 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
Mechanical |
Nominal Value
|
Unit
|
Test Method
|
Tensile Strength 2 (Yield)
|
|
psi
|
ASTM D638 |
Tensile Elongation (Yield)
|
|
%
|
ASTM D638 |
Flexural Modulus -
1% Secant
|
|
psi
|
ASTM D790 |
Hardness |
Nominal Value
|
Unit
|
Test Method
|
Rockwell Hardness (R-Scale)
|
|
|
ASTM D785 |
Thermal |
Nominal Value
|
Unit
|
Test Method
|
Deflection Temperature Under Load (66 psi, Unannealed)
|
|
°F
|
ASTM D648 |
Uses | |||
Uses may also be described by the following terms: Compounding, Compounds.
|
|||
Agency Ratings | |||
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
|
|||
Available Documents | |||
Technical Datasheet
|
Notes |
1Typical properties: these are not to be construed as specifications. |
22.0 in/min |
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. |