MAGNUM™ 3404 Datasheet

ABS Resin

Supplied by Trinseo

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
MAGNUM™ 3404 is an excellent general purpose extrusion / thermoforming resin with outstanding processability. It combines medium impact with medium-high heat performance. The mass (continuous process) ABS technology ensures an ABS resin that combines excellent processability with a stable light base colour that is ideal for self-colouring.

Applications:
  • Medium impact monosheet
  • Co-extruded sheets

Complies with:
U.S. FDA 21 CFR 181.32(a)(3)(i)
(See Notes)
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
 
Features 
  • Good Processability
  • High Heat Resistance
  • Medium Impact Resistance
Uses 
  • General Purpose
  • Sheet
 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
  • Injection Molding
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183/B
--
lb/in³
ISO 1183 2
Melt Mass-Flow Rate (MFR)
     
220°C/10.0 kg
g/10 min
ASTM D1238, ISO 1133
220°C/5.0 kg
g/10 min
ASTM D1238
230°C/3.8 kg
g/10 min
ASTM D1238
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Molding Shrinkage - Flow
%
ISO 294-4
Water Absorption
    ISO 62 2
Saturation
%
 
Equilibrium
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
--
psi
ASTM D638
0,126 in, Injection Molded
psi
ISO 527-2
--
psi
ISO 527-2 2
Tensile Strength
     
Yield
psi
ASTM D638
Yield, 0,126 in, Injection Molded
psi
ISO 527-2/50
Yield
psi
ISO 527-2 2
Tensile Elongation
     
Yield
%
ASTM D638
Yield, 0,126 in, Injection Molded
%
ISO 527-2/50
Nominal strain at break
%
ISO 527-2 2
Flexural Modulus
     
--
psi
ASTM D790
0,126 in, Injection Molded 3, 4
psi
ISO 178
Flexural Stress
     
0,126 in, Injection Molded 3, 4
psi
ISO 178
Yield
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     
-22°F, Injection Molded
ft·lb/in²
ISO 179/2C
-22°F, Injection Molded
ft·lb/in²
ISO 179/1eA
73°F, Injection Molded
ft·lb/in²
ISO 179/1eA
73°F, Injection Molded
ft·lb/in²
ISO 179/2C
Charpy impact strength
    ISO 179/1eU 2
-22°F
 
 
73°F
 
 
Notched Izod Impact
     
73°F
ft·lb/in
ASTM D256
-22°F, Injection Molded
ft·lb/in²
ISO 180/A
73°F, Injection Molded
ft·lb/in²
ISO 180/A
Tensile notched impact strength (73°F)
ft·lb/in²
ISO 8256/1 2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi
°F
ISO 75-2 2
264 psi, Annealed
°F
ISO 75-2/A
264 psi
°F
ISO 75-2 2
Vicat Softening Temperature
°F
ASTM D1525, ISO 306/B50
CLTE
    ISO 11359-2 2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Volume resistivity
ohms·in
IEC 60093 2
Relative Permittivity
    IEC 60250 2
100 Hz
 
 
1 MHz
 
 
Dissipation Factor
    IEC 60250 2
100 Hz
 
 
1 MHz
 
 
Flammability
Nominal Value
Unit
Test Method
Burning Rate 5 (0,0787 in)
in/min
ISO 3795
Flame Rating 5
    UL 94
0,06 in
 
 
0,12 in
 
 
Burning Behav. at 1.6mm nom. thickn. (0,06 in, UL)
 
ISO 1210 2
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (60°)
 
ASTM D523
Related Terminology
This supplier and product may also be known by these terms: Styron LLC
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Medium Impact Resistance, High Heat Resistance, Heat Resistant.
Available Documents
Press Release - Trinseo broadens Plastic Resin offering in North America (English)
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30,079 in/min
43-points
5This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.